Question about 1993 Toyota Corolla

1 Answer

Replace rear seat belt in 1993 Toyota Corolla

How do I replace the broken latch or the entire rear seatbelt in a 1993 Toyota Corolla? Both the center rear and side rear latches are faulty.

Posted by on

  • 1 more comment 
  • kshaffer Oct 07, 2008

    The female latches at the seat bottom

  • Toyota Ed May 11, 2010

    Are you trying to replace the female latches by the seat bottom, or the shoulder belt assemblies?

  • Anonymous Mar 15, 2014

    cant find the fog lights

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).

Posted on Oct 07, 2008

  • Toyota Ed Oct 07, 2008

    Thanks for the FixYa! Much appreciated!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove Back Seat of 2007 Toyota Avensis to replace seatbelt


Seat base is not bolted.Grab under front of base with both hands near the ends and just snatch up quickly.Pull the seat base out from the car and the bolts for seat belts are visable.

Apr 09, 2014 | 2007 Toyota avensis 1.6

1 Answer

What's your problem?slow return on seatbelt


it is possible the seat belt has turned and knotted itself.take the seat belt ang pull it all the way out,its entire length and let it back in slowly uon its own maintaining slight pessure on the belt ,making sure it does not twist on its way in.now try the belt,if it was twisted or knotted it should now work properly.if not check the return spring to see that it is not rusted or broken.spraying some wd 40 on the return spring and pulling the seat belt in and out normally will cure the jamming.

Jan 26, 2013 | 1993 Toyota T100

1 Answer

How do i replace the pre tensioner seat belt on my toyota corolla


i think my new 2012 toyota corolla back seat seat belt are put in incorrectly from factory.

the right belt clip buckle clip says"Center" when it should be right, and the center is the right. so when i buckle the back seat belts they are kinds crossing each other . Why ? any suggesions?

Jun 21, 2012 | 2003 Toyota Corolla

1 Answer

How to unlock a 96 corolla seatbelt that won't


the return spring may be broken, if so the seat belt will need replacing.....cheers.

Sep 09, 2011 | 1996 Toyota Corolla

2 Answers

I am in the process of replacing front seat belts on 2003 Toyota Corolla. After I removed the old ones and installed the replacement, the replacement seatbelt will not budge. I cannot pull it down or get...


Hi.

The inertia reel has not been mounted properly. Replacing Toyota belts is quite tricky. Follow the step by step procedure illustrated in manual below. Belts are included in seat removal procedure (clearly do not remove seat). Check chapter starting at page 183/184 in manual below.

Please refer to pages from 184 onward in this service manual.

Regards.

Ginko.

Mar 26, 2011 | 2003 Toyota Corolla

1 Answer

I have a 1990 toyota camry. the rear seat belt doesnt seem to hold my childs car seat. seat belt does not lock. both rear seatbelts are the same. Any ideas?


the camry does NOT have the type of belt you require.only answer is replacements or change the child seat to one that fits the anchorages.

Oct 11, 2010 | Toyota Camry Cars & Trucks

1 Answer

The driver's side seatbelt stalk latching mechanism has broken. How to I repair or replace it?


most likely - you will need to remove the seat or just unbolt the entire mechinizem. Yours has a rubber cover to hide the bolt.

Remove the old - replace the new.

Apr 01, 2010 | 1998 Toyota Sienna

1 Answer

The driver side seat belt in my car won't retract after my air bag deployed.


should replace seatbelt if you were invloved in a accident,the force of a crash will damage the seatbelt internals,cheers roady

Feb 14, 2010 | 1996 Toyota Corolla

1 Answer

How do i replace the female end of the front passenger seatbelt?


U can't replace parts of seat belts, u either must buy an entire belt assembly or find a used one, which I don't recommend, the reason they don't sell parts is safety related.

Feb 19, 2009 | 1993 Toyota Corolla

Not finding what you are looking for?
1993 Toyota Corolla Logo

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...