Need to replace the Door mirror glass. Is it just a simple matter of prising the old one off and replacing or is there anything I need to know or a knack to doing it, like top/bottom/side first ?
Can get a Genuine replacement no problem just need to know how to remove old glass.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It should just pop off if you get something in behind the acctual glass and gently lever it you dont need to get the rear casing off at all. If its heated the wiring will be simple bayonet connectors easy to take off/on. Gently push the new glass into position and readjust teh mirror from the cabin as it will have moved!
Before servicing the vehicle, refer to the Precautions Section.
Remove or disconnect the following:
Disconnect the negative battery cable.The mirror inside cover trimThe door panelThe electrical connector to mirror motorThe nut attaching mirror assembly to door frameThe outside rear view mirror
Fig. Removing cover trim and nut Removing cover trim and nut
Fig. Removing mirrored glass from assembly Removing mirrored glass from assembly
Remove the mirror glass:
Fold the mirror glass forwards and inwards as illustrated.
Grasp and pull the mirror glass lengthways until it releases.
Work the glass out.
Remove electric motor:
Remove the 3 screws from behind the mirrored glass.
Separate the connectors
Remember the positions of the connectors.
Remove the mirror motor.
Fig. Removing connectors and screws holding mirror motor Removing connectors and screws holding mirror motor
Install or connect the following:
The electric motorThe electrical connectionsThe 3 screws that go behind the mirrorInstall the terminal pinsFold out the mirror mounting on the motorHook the mirror glass into the inner mountingPress the mirror glass into place.Place mirror in position in door
Fig. Reattaching mirror and electric motor connectors Reattaching mirror and electric motor connectors
Install or connect the following:
The nut attaching mirror assembly to door frameThe connectorThe door panelThe mirror inside cover trimThe negative battery cable
You need to put on a pair of gloves, and safety glasses. (Safety First !) Prise off the broken mirror from the plastic base that it is stuck too.
Give the plastic a clean with nail polish remover or similar.
Peel off the backing on new mirror glass, and carefully stick it on.
Hi there! I think you poke a screwdriver into the slot in the bottom of the mirror housing and move it side to side. The mirror is probably held in a sort of cage in a bayonet type fitting. It's really clear when it's out but the first time can be awkward. Alan.
no as a matter of fact it is real simple nowadays...just remove the broken glass and go to the auto parts store and they have another one in a kit that glues right back on to the mirror... good-luck ray
If the metal pivot arm is not broken you can just replace the glass and plastic housing. To remove the glass you tilt the glass down towards the floor and use a wide plastic or wood bladed object to prise from behind, the glass should pop off from its clips. Remember to catch it if its not damaged. To remove the housing once the glass is out you need to look underneath the mirror unit, there you will find a small plastic bung, gently prise it out and then use a long small flat bladed screwdriver straight up inside the hole and lever towards the front of the car whilst lifting straight up on the plastic housing, this should then lift off. To replace just slot the new housing on and click into place then fit the glass back, remember to connect the wires first if it is a heated glass.
If the metal pivot arm is broken then you will find the remaining screws behind the plastic trim inside the vehicle.
hi there the easiest way is to remove the lower black cover 2xscrews then with aplastic spreader locate the 2 tabs that hold black cover to mirror cover and press them in and pull black cover down then with a small pry tool carefully prise mirror glass out and disconect wires this will reveal the small single screw that holds the cover to the mirror unit remove this and the rest should be self explaned hope this helps..