I have mazda 323 2001 model my radio is matsushita BN1C 66 ASO
serial no is: 141882
i get this word "SEC" in the display
many people told me i should enter code for radio
please can you send the code for me ?
also how i can enter the code to the radio
i wait your answer ..
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your code is 4433 Use preset 1 to set digit 1, preset 2 to set digit 2, etc Once the code displayed is correct, push your unlock button to unlock the radio. The unlock button varies by model, but is always either AM/FM, CD, or TAPE. There is no penalty for pushing the wrong unlock button as long as your code is correct.
If you have locked out the radio from failed code attempts (radio reads "OFF", you will need to leave the key in the ACCESSORY position with the radio displaying OFF for approximately 1 hour. After which time the radio will revert to CODE and you can enter your code then.
I have a manual for a '99 model - the one with separate radio/cassette and CD model No's; OK55Y 66 860 OK55L 66 860 OK55D 66 860 3K55L 66 860 2K55D 66 860 3K55Y 66 860
Under "How to enter your password" 1. press power button & "Test" appears for 5 seconds, and blinks for 5 minutes. If you turn the power button off then back on again within 5 minutes "Code" blinks on the display. 2. enter password using the numbered buttons - press button 1 once to let it know it's the first digit, then press button 1 again however many times to bring up the code for the first digit. Press button 2 to let it know it's the second digit, then again however many times....etc. To enter default 1111 code, press button 1 twice,, 2 twice, 3 twice then 4 twice. 3. when all four digits entered (default is 1111) press SEL button and display should say "GOOD" 4.You get three goes, if still wrong after third attempt "HOLD" then you have to leave it for an hour