Question about 1991 Ford Ranger Supercab

2 Answers

1991 ford ranger not getting any spark

No spark changed sensor module and timing belt. still no spark 1991 ford ranger 5 speed 4 cylinder front wheel drive

Posted by on

  • 3 more comments 
  • Anonymous Mar 14, 2014

    How do you adjust the Bands on a 1994 2 wheel drive Ford Ranger

  • Anonymous Mar 15, 2014

    how to change a front spring 1997 ford ranger

  • Anonymous Mar 16, 2014

    where is the starter relay located at on a 1998 ford ranger 2 wheel drive 4 cylinder engine

  • Anonymous Mar 22, 2014

    Hear clicking noise in front wheel of ford ranger what could be wrong

  • Anonymous Mar 29, 2014

    can't uninstall the coolant sensor

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

Probably the coil , but have your alternator checked first

Posted on Oct 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

Make sure your crank sensor is plugged in

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

1 Answer

Need to know what 5 speed transmissions will interchange with a 92 ranger with a 3.0


You didn't mention if it was 2 or 4 wheel drive so I went with a 2 wheel drive. According to hollander the 5 speed transmaaion fits a ranger (2WD) 1991 - 1994 and a Mazda B3000 1994 only. Hope this helps.....

Oct 29, 2012 | 1992 Ford Ranger

1 Answer

My 1991 Ford Ranger isn't getting any spark. I changed the spark plugs, wires, ignition module, and the coils. It turns over but does not start


if this is a 2.3 duel fire with the 8 spark plugson a 4cyl it needs a crankshaft postion sensor sorry to say hope it helps

Jan 14, 2011 | 1991 Ford Ranger Supercab

1 Answer

Spark knock i think under loads or up hills 91 ford ranger 4.0liter 5 speed manual.


Your timing could be too far advanced, EGR valve could be stuck closed, engine could be getting too hot (antifreeze leak or stuck thermostat), or there could be excessive carbon buildup on top of your piston, causing a hot spot.

The most common cause ive found is a dirty or defective mass air flow sensor. You can try removing the sensor and cleaning it first.

Mar 29, 2010 | 1991 Ford Ranger Supercab

2 Answers

Firing order for Spark Plug wires


Here is the diagram you ask for. While it says it is for the 3.0L V6, it is the same for the 4.0L V6 if that's what you have...


2627ab5.jpg

Feb 15, 2010 | 2004 Ford Ranger

1 Answer

TWO DAYS AGO 94 RANGER (4 CYL) SOHC...STOPPED ON ROAD. CRANKS BUT DOES NOT START. HAS FUEL PRESSURE. CHANGED FUEL FILTER. CHANGED AIR FILTER. CHANGED ONE OF THE DISTRIBUTOR COILS...TWO SPARK WIRES WERE NOT...


If all the coils are giving spark now,then you moat likely have gas fouled plugs now,so change them out with new ones,all 8 of them.If you do not have spark on all plug wires,pull the timing belt cover,and align the cam shaft and the cam,to see if the belt has jumped.If It hasn`t,replace the crankshaft sensor.

Oct 17, 2009 | 1994 Ford Ranger Supercab

2 Answers

1991 Ford Ranger w/ABS Rear brakes lockup


sounds like you need to replace the wheel cylinders also check brake shoes and adjust properly upon reassembly

Jan 30, 2009 | 1989 Ford Ranger

1 Answer

91 Ford Ranger 4 cyl 5 speed. Can`t find clutch slave cyl. bleeder. Internal slave. Hard at times to get into 1st and rev. Also can`t find connector to hook up tester for check engine light on.


first the bleeder will be located on the cylinder that is mounted on the transmission to engine connection by the bell housing. Second the port for this is located along the drivers side under the hood either by the fire wall or along the top of wheel well it will be marked with a grey cap labled EEC.

Aug 28, 2008 | 1991 Ford Ranger Supercab

1 Answer

1995 Ford F350 5spd. distributor cap wiring diagram/layout!!!


1) #1-4 pass side front to rear #5-8 drivers side front to rear
2) 1-3-7-2-6-5-4-8
3)#1 is usually marked on cap wires go ccw
4) TDC #1 cyl you must remove the shorting plug before timing
it is located by the dist plug or the ignition module small gray plug

Jul 17, 2008 | 1995 Ford F350

Not finding what you are looking for?
1991 Ford Ranger Supercab Logo

Related Topics:

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...