- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would recommend that you remove the headlight assembly/ It is a very simple procedure and will make replacing the bulb that much easier.There will be three mounting bolts on the top in plain sight, Its an import so your bolts are going to be metric 10 or 12mm I believe. After these are removed, there will be a clip still holding the headlight in, grip the front of the headlight and the back and give it a good tug up and it should come free.
After the headlight has been removed then unplug the wire from the back of the headlight, you will see three prongs there will be a rubber gasket and a metal ring, you will need to remove the ring to be able to get the old bulb out. be careful as not to damge the rubber gasket or you will get water into your headlight. If you need any pics I can post them for you. Hope this works.
QUITE EASY, REAR OF HEADLIGHT IS A RUBBER CAP OR COVER, THIS JUST PULLS OFF,AFTER REMOVING THE LIGHT WIRING PLUG, .REVEALING THE CLIP WHICH HOLDS THE LIGHT BULB INPLACE. LIFT UP THE SPRING BY JUST SQUEEZING WHICH UNHOOKS THE SPRING FROM ITS HOLDER, REMOVE THE OLD BULB AND REPLACE WITH A NEW ONE. IT WILL ONLY FIT ONE WAY AS THE LOCATING PINS ARE IN DIFFERENT POSITIONS, REPLACE THE HOLDING CLIP AND THEN THE RUBBER CAP FINALLY REPLACE THE WIRING PLUG TO BACK OF LIGHT BULB.
Unplug the connector running to the back of the headlamp bulb. Remove the rubber ring that is on the back of the headlamp. It just pulls off. After the rubber is removed, you will see the clip to release the bulb.
Its a small Black box on the left side... Everything on the new models are clipons... I did it few days ago and took me 5 mins to do the whole thing.. You will need to remove the air tube first.. again its clip on so should not be a prob...
try to google it... thats what I did... Hope this helps!!!