Question about 2000 Ford Taurus

4 Answers

CODE #P1413 CAR RUNS RUFF.OVER THE WEEKEND I CHANGED PLUGS AND WIRES. ALSO LAST WEEK HAD WATER PUMP REPLACED

Posted by on

  • dweezel Dec 22, 2008

    Location and wiring of PCM

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

Hi

I believe that P1413 is an electric air pump problem. The electric air pump itself, the relay that controls it, or (you hope not) wiring between computer and air pump, or the computer itself. Answer P1413 Secondary Air Injection System Monitor Circuit Low Detailed Description The secondary air injection system monitor circuit is low, indicating the electrical AIR pump is off although the electrical AIR pump was commanded on by the PCM. Possible causes :- Open B+ circuit. Open AIR circuit. Damaged PCM. Air circuit short to ground. Damaged AIR pump. Damaged solid state relay. Diagnostic Aids The AIR monitor circuit is held low by the resistance path through the AIR pump when the pump is off. Also, look for open circuit from SSR to AIR pump.

Posted on Oct 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My car had threw all of the water out but the car never said it was running hot. As soon as the the car started smoking from the hood we turned the car off in the middle of the highway nd we never turned the car back on what could this problem be? its been since the last weekend of July!

Posted on Dec 07, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Symptoms of bad egr

Posted on Apr 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

Did it overheat?....head gasket

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 ford explorer runs ruff it idles at about 500- 700 rpm real ruff and driving it is ruff and very jerky no codes come up garyirving@aol.com


The computer is the only thing that will not throw a code since it cannot tell on itself, but have you checked to see if there is water in the fuel? Seafoam is a good product to use to try and displace any water in the fuel. I am not saying to do this, but... on my offroad car (not for street legal use*) I pour one bottle of the 90% isopropyl alcohol in the tank with as low of a tank of gas as possible, and it usually does the trick. Water in the fuel will do pretty much exactly as you are describing, so it might be worth it to try one of those suggestions, hopefully someone with one of these trucks will be able to shine some light on the subject, good luck

Jan 18, 2013 | Ford Explorer Cars & Trucks

2 Answers

Car starts and idols good drive for a few mins it starts cutting out at low rpms.. Changed plugs and wires last week did change much. Seems like the car is flossing out just wondering if it might b fuel...


well on low rpm is possible due to a a damaged distributer. its the lt engines fault after getting older the seals on the distributer starts taking in forign objects eg water .its located under the water pump. but check for a wire damage on the harness it will be visible on left hand side if ur faceing towards the car below the throttle body.

Sep 26, 2010 | 1994 Chevrolet Camaro

1 Answer

I changed the spark plugs in a 2005 buick rainier and now the car runs ruff and the check engine light is on


when you changed the plugs, did you make sure to gap them correctly? also, this could be faulty wires. Why did you replace them to begin with?

Mar 19, 2010 | 2005 Buick Rainier

2 Answers

Runs ruff changed mass air flow plug wires plugs


check for vacuum leaks, check distributor cap and rotor button, clean or replace as necessary. Use quality injector cleaner.

Feb 18, 2010 | 1993 Lincoln Mark VIII

1 Answer

Rough idle and acceleration on 1998 Chevrolet Silverado 5.0


Bad EGR valve comes to mind here. Assuming the plugs are good, the EGR valve woiuld be what I'd look at.

56a1ee7.gif

Jul 26, 2009 | 1998 Chevrolet Blazer

2 Answers

Engine runs ruff


you may have a valve or valves leaking which will cause it to run rough, have a leak down test done or a compression test

Jun 22, 2009 | 1994 Volvo 940

1 Answer

96 camaro runs hot


A Blown head Gasket will cause the Symtoms described above. Check your Water Pump and Thermostat also.

Jan 17, 2009 | 2002 Ford Taurus

1 Answer

2000 Eclipse wont start, fuel in plugs


I hate to be the one to tell you this but if there is fuel,oil,water getting into your plugs than you have bad rings. the vehicle will not start because it is not getting enough compression to do so. If you love the car and would like it to run again it will cost about $1000.00 to have the rings done if not more. But since there is water than fuel getting into your plugs than it is a defenent sign that your rings are bad.

Nov 19, 2008 | 2003 Mitsubishi Eclipse Spyder

Not finding what you are looking for?
2000 Ford Taurus Logo

1,576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...