Question about 1996 Toyota Previa

1 Answer

1996 Toyota Previa code p0441

Is these thing below regarding code p0441 easy to do-it-yourself in a 1996 toyota previa?

Remove Vacuum Hoses between EVAP VSV and Charcoal Canister and discard.
2. If there is a metal vapor pipe between EVAP VSV and Charcoal Canister, clean inside of vapor
pipe
3. Replace EVAP VSV and Charcoal Canister assembly with new parts.
4. Install new vacuum hoses between EVAP VSV and Charcoal Canister

Thank you,

Jorge Morales

Posted by on

  • 3 more comments 
  • Anonymous Mar 18, 2014

    Where to by part at reasonable price

  • Anonymous Mar 18, 2014

    Where to find part cheap

  • Anonymous Mar 24, 2014

    How do I replace the charcoal canister on my 2007 Toyota Sienna?

  • Anonymous Mar 30, 2014

    replace the air conditioning vapor canister, install a new one.

  • Anonymous Mar 30, 2014

    what it looks like and where can i get it

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

P0441 is Evap Emission Incorrect Purge Flow; the repair you are describing is easy, and should correct the P0441 restricition...I would anticipate no large problems.

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The compression is the same for all cylinders(150), but when I turned motor over, water came out of #1 cylinder only. Any idea?


Sounds like a head gasket leaking water in from the cooling system. Does it run OK? Any water in the oil on the dipstick and a mayonnaise type film on the oil filler cap?

Jan 21, 2016 | 1992 Toyota Previa

1 Answer

I'm looking for a Manual for a Toyota Previa 2.4


Try looking looking at your local auto parts store

Jun 24, 2011 | 1996 Toyota Previa

1 Answer

My 2003 Toyota Previa (diesel, with ABS) brake warning light on dashboard lights on after pressing brake pedal a couple of times and when it lights off pedal goes slowly all the way down to the floor. In...


Sounds like there is a fault with the vacuum pump not generating enough vacuum for the brake booster assist, or a leaking vacuum hose. Try pinching off all the vacuum hoses to see if the problem goes away. Could also be a leak in the brake vacuum booster itself

Oct 11, 2010 | 1996 Toyota Previa

1 Answer

How to replace dash light bulb of 1991 Toyota Previa van


pop fuse cover, remove vent housing, remove speedo upper cover, remove 4 bolts holding speedo remove speedo, change bulb

Mar 31, 2010 | 1991 Toyota Previa

1 Answer

How do you replace front brake pads on 1996 toyota previa


Just remove the retaining bolts conected to the caliper and pull out. There should be two bolts here. Loosen conterclockwise as if you were facing the bolt.

Nov 29, 2009 | 1993 Toyota Previa

1 Answer

I have a toyota previa gx 1996 orange light seems to stay on


not to many local independent repair shop will have the right equipment to test or do correct diagnostic. same way if you have bone problems, you want to go see the bone specialist not an eye doctors, Engine service light could mean one or many things, I would recommend take it to Toyota Dealer and have them do proper diagnostic, Will cost you 70 to 85 bucks, its lot cheaper than guessing and buying parts and hope that will be the right one. Once they do diagnostic they will tell you what it need and you can do the work replacing the part your self. good luck

Oct 30, 2009 | 1996 Toyota Previa

1 Answer

Oil light on toyota previa


have the oil pressure checked ... if you are not using too low a viscositity of oil (the weight) you might be able to use a thicker weight oil to raise the pressure.

Apr 04, 2009 | 1996 Toyota Previa

1 Answer

Toyota Previa GS 2000 - vibration through the steering wheel at high speeds


Did you have to remove front drive shaft to replace stabilzer link bars?

Aug 10, 2008 | 1991 Toyota Previa

Not finding what you are looking for?
1996 Toyota Previa Logo

Related Topics:

2,038 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...