- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Assuming you Focus does not have DRL, setting the light switch to low beam energizes the low beam relay in the battery junction box, sending power through 10A FUSE 16 (L) and FUSE 17 (R) to the headlamp low beam elements
i had this happen with my dodge ram 1500. the guy i bought it from put 350 dollar moon lit lights in with leds and they looked impressive but the issue was that they didnt go bright and i could only see 40 feet in front of me and i was sure taping led flashlights would have done me more good that those stupid headlights. then i had the idea of if the brights work and the dims dont then that means no electricity is getting to the dims so i decided to bridge the power from the bright headlight to the dims and it made all four work. now they all work, and only on bright. so im figuring there is a issue with the wiring in the truck. so this is a temporary solution if you really need just plain old lights like i did because i live out in the country
I finally got mine fixed!! It was the crossover wires between headlights(the wires that run in front of the radiator). One wire was torn into. Spliced them and taped back together. Hope this works for you!! I also used something called wire caps that help hold the spliced wires together. I found this solution on yahoo.com search engine where someone else had suggested this. My only problem was no dim lights, but all the other lights worked fine.