Question about 2006 Ford Escape

1 Answer

I need to replace the crusie control buttons

I have a 2006 escape and my wife snagged her jacket on the on/off button and ripped the button off, the brass "springs" flipped out, nowwhere to be found. how do you remove the button assembly from the steering wheel for replacement? thanks in advance.

Posted by on

  • yadayada
    yadayada May 11, 2010




1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

Disconnect batt.wait 5 minutes,push brake several times,locate airbag fuse and remove.this is improtant as you will have to remove drivers airbag.there are 2 round plastic caps covering the 2 airbag bolts located at back of steering wheel by the cruise switches.remove caps remove the 2 8mm bolts.remove airbag,set airbag away from you with plastic cover of airbag up.replace switches.reinstall airbag,reinstall fuse.reconnect batt.

Posted on Oct 21, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a schematic for a 2006 escape to check coil driver free wiring diagrams . Enter vehicle info . year make , model , engine size . Under system click on engine , them under subsystem click on fuel control . Click search button , then click on blue link . First diagram is for coil on plug ign.

Jan 23, 2017 | 2006 Ford Escape

1 Answer

How long will it take to change a 2006 ford escape control arm bushings

No more than two hours, but you will need a "pickle fork" tool for the ball joints (if you need to drop the lower A arm), and a few other specialized tools, as well as a front alignment after the replacement is done.

May 21, 2015 | 2006 Ford Escape

1 Answer

2006 Ford Escape Code p7011

No P7011

P701 possible- for a trans issue

Wouldn't be at any dealer for any reason- unless
you win the lottery

If you drive any vehicle with any trans issue, even ten
miles, you may ruin it

Feb 21, 2014 | 2006 Ford Escape

1 Answer

Ford Escape 2006 unlock buttons not working

Sounds like a problem with the central timer (lock) controller.

This is not an easy item to work on and diagnose, and can be almost impossible without a scan tool and a factory troublshooting flow chart

Dec 03, 2012 | 2006 Ford Escape

1 Answer

The crusie control will turn on but the set button with not set the speed

mcdevito75 here, If your cruise control is on the steerinf whell you may need a whole complete new cruise control panel. Let your local shop check it out.

Jun 18, 2010 | 2003 Chrysler Town & Country

1 Answer

The cruise control does not work. It failed completely. All other electrical funtions normal.

Does the button for the crusie feel normal? if so check the fuse also check the intake cable to see if the crusie cable is bound up and spray wd-40 on it and work it back and forth with your hads to make sure it's free. if yo still can't find the problem e-mail me and I will tell you what to check next.

Nov 17, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

No horn, crusie control and airbag light on

the CLOCKSPRING needs replaced in the steering colum.

Apr 16, 2009 | Ford Super Duty Cars & Trucks

1 Answer

Power window failure on 2002 Ford Escape

I have a 2001 Ford Escape. My driver window doesn't alway roll up when I push the button. As silly as it sounds, when the driver window won't come up, I roll down the front passenger window and then push the buttons for both front windows. The driver window comes up then. I've been doing this for about 6 mos. so eventually it will probably fail. But it is a short time fix.

Apr 07, 2009 | 2002 Ford Escape

Not finding what you are looking for?
2006 Ford Escape Logo

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5651 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides