How to replace map sensor on chrysler concorde

Hi Anonymous, L3 engine 2.3L or
(Mazdaspeed 6)
3.0 L Duratec 30 V6????????????
post the VIN and then we see what is there.
got the TURBO with

map sensor is covered i the service manual for sure and the simple test.
the mostly never fail but vacuum to it can
so we clean it.
the engine parts locator for
(Mazdaspeed 6)3.0 L Duratec 30 V6
engine shows no such MAP sensor.
there is and egr boost baro sensor
why not do your own hunts in the service manualthe 3.0 liter uses MAF sensor,mass air flow to calculate fuel rates.
why not post a problem first.
like engine power low, or what ever it is
so the helper can be on the same page
btw
the 2.3L (L3 engine code) for sure has MAP sensor.
just incase it is L3 engine and not larger V6
here is (id 10) the map 2.3L only 4 cyl. not V6
v6 has none. (egr yes) egr baro is for egr testing only OBD2 .

all shown here

https://www.justanswer.com/chrysler/5klbd-chrysler-concorde-lxi-2004-chrysler-concorde-lxi.html

https://www.google.com/search?q=2000+Chrysler+Concorde+LXI+crankshaft+sensor+location

..

P1296 CHRYSLER - 5 Volt Reference Voltage Missing At Throttle Position Sensor
https://www.autocodes.com/p1296_chrysler.html

Here's a video on your map sensor. Chrysler 300 map sensor location and replacement

sound like faulty engine coolant temperature sensor.

The map senser is right on the intake manifold and it's held on with one bolt and has a three wire weather tight connector.Yhis senser costs $102 at my parts store and is made by AC delco.

This is on a 2.7L V6...Is mounted in the front of the timing case cover...

U don't scrap an engine for blown head gaskets, it is not that big a job if this is a 3.5 liter, and any 3.5 will work.

it has one vacuum line to it and its half the size of a pack of cigarettes. Look around the intake area

no any eythelene glycol antifreeze will do ,concentrated is best ,as for colour --- optional