Question about 2002 Dodge Neon
You need to check the switch and make sure it is getting power...it sounds as if either you may have a bad sitch or bad wiring to the switch ...like in the wiring between the door and interior of the car
Posted on Oct 08, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Passenger door module (PDM)
Body control module (BCM)
LR power window switch
RR power window switch
Window up and window down relays in each of the rear passenger window switches
Window lockout switch
Reversible power window motors in each of the doors (circuit breaker protected)
LT DOOR CB 25A (System power for left rear window)
RT DOOR CB 25A (System power for right rear window)
The power window system will operate anytime the retained accessory power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The DDM contains 4 power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the 2 front windows have 3 positions Up, Down and Express Down, while the switches for the rear windows have only 2 positions, Up and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has 2 positions Up and Down. Each of these switch positions is a direct input to the PDM.
The 2 rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a class 2 message from the DDM, can control the set of relays which will activate the rear window motors.
Oct 21, 2016 | 2003 GMC Envoy
Mar 20, 2014 | 2007 GMC Sierra 1500
Sep 04, 2012 | Cars & Trucks
Nov 12, 2010 | 1999 Chevrolet Venture
Oct 08, 2010 | Chevrolet Aveo Cars & Trucks
Feb 21, 2010 | 2005 Ford F 250 Super Duty
Jul 20, 2008 | 1998 Dodge Stratus
Feb 21, 2015 | 2002 Dodge Neon
55 people viewed this question
Usually answered in minutes!