Question about 2005 Chevrolet Aveo

4 Answers

My car won't go in gear

First it was my key that was stuck. So we took the cover off of the shift knob and found the problem. It was this botton thing, when you put the car in park it pushes this thing that released the key. Well something had chipped off that so it didn't work anymore. Now, after finding that, my car won't go into gear. I have to physically push the shift lock release button to put my car in gear. So, now my key is stuck in the ignition, and my shift lock release button won't work on it's own.

Posted by on

  • flagaber Mar 09, 2009

    I have the same problem I can take out the key just when I take out the battery I can take it out, I power the car ( put back the battery ) turn on the ignition but I cant change the shift gear from the Parking position, to do that I have to introduce any key in the hole near the shift but as soon that i put the shift on parking again I can not move til the procedure is repeted again. Can somebody help me? thanks.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I got same problem when I first got the car (bought used), took me a day to find out one of the fuse blown caused the problem now I always have 10A fuse spare in my glove comparment, check all your fuses (I believe it's an Audio/Clock 10A fuse) will solve your, good luck ...

Posted on Feb 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My car which is a lincoln town car 1998 dont want to go from park to anything i try pushin the break pedal down hard nothin then i do it lightly and nothin happens... what do i do?

Posted on Jan 29, 2010

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Break switch the newer cars requires to press break in order to shift frm park if that switch dont register then automobiles will not release

Posted on Apr 01, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 suzuki automatic transmission stuck in park


that is park lock failure, build into the shifter section,it has an
electric solenoid lock. and a bypass button.
in the glove box, see oper. guide, it tells you where the erg. release
button location, and varies by sub body type and options.
its hidden cover, or a slot, on most cars. the slot type is to insert
any key in slot and push. bang, it opens (brake set,etc)

Dec 25, 2013 | 2004 Suzuki Verona

1 Answer

Jeep wrangler 2005 automatic floor gear shifter is loose won't engage stuck in park


try pushing the knob down onto the shifter a little bit then try and shift. Sometimes if that knob is raised even a little bit it will be locked in park. Can't be 100% sure without seein it but worth a shot. Hope that helps you.

Oct 02, 2012 | Jeep Wrangler Cars & Trucks

1 Answer

I have a '94 F150, straight 6, 4wd, 5 speed manual trans. My transmission shifting knob popped out of it's position and was stuck in a gear. I opened up the cover and was able to move the gear manually...


it seems like your shift fork is in between gears you must remove the shift tower and align all the shift levers then drop the shift knob into the middle being neutral tighten it up and it should be ok but remember the replacement could be slightly thinner then the original and causing this new problem.

Nov 13, 2010 | Ford F-150 Cars & Trucks

1 Answer

1999 Buick Regal GS gear shift knob button is stuck to release


Check in your fuse panel. The top first row and the first fuse. I took that fuse out and had the same problem. My gear shift button was stuck. I put the fuse back in and it worked.

Mar 31, 2010 | 1999 Buick Regal

2 Answers

I have a 2005 ford focus and my key is stuck in the ignition


Hope this helps all.... If the key is stuck (won't come out) and the column is NOT locked, one the gear shift there is a plastic sleeve. Put the gear shift in park...slide your hand below the knob and pull that sleeve up! Presto!!! it locks in park and the key comes out. I just put all the stuff i took apart back together on 2005 Focus... the other solutions may work but this is the first step to check... no tools and you know right away...
AJay

Feb 07, 2010 | 2006 Ford Focus

2 Answers

2007 ford focus key stuck in ignition.


Hope this helps all.... If the key is stuck (won't come out) and the column is NOT locked, on the gear shift there is a plastic sleeve. Put the gear shift in park...slide your hand below the knob and pull that sleeve up! Presto!!! it locks in park and the key comes out. I just put all the stuff i took apart back together... the other solutions may work but this is the first step to check... no tools and you know right away...
AJay

Jan 22, 2010 | 2006 Ford Focus

3 Answers

Key is stuck in ignition 2005 ford focus


Hope this helps all.... If the key is stuck (won't come out) and the column is NOT locked, on the gear shift there is a plastic sleeve. Put the gear shift in park...slide your hand below the knob and pull that sleeve up! Presto!!! it locks in park and the key comes out. I just put all the stuff i took apart back together... the other solutions may work but this is the first step to check... no tools and you know right away...
AJay

Nov 05, 2009 | 2005 Ford Focus

1 Answer

2001 chrysler sebring convertable key stuck in ignition -


Is the gear shift button stuck in, if so hit the gear shift a couple of time and that should unstick the botton, allowing you to remove your key

Jul 04, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2005 Chevrolet Aveo Logo

1,310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...