I have purchased a leather steering wheel and want to put it on my car. Could anyone tell me how to take the cover off, airbag out of my current one to remove it. Also any safety such as disconnecting battery? etc.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.ebay.com/sch/Suzuki-Steering-Wheels-and-Horns/.../i.html eBayFind great deals on eBay for Suzuki Steering Wheels and Horns in Steering ... 2004Suzuki Aerio Grey and Black Steering Wheel with Airbag OEM 2003 ... 04 05 06 07 08SUZUKI FORENZA- Steering Column, Black with Key, NO AIRBAG ... 2006 Suzuki Aerio Gray Leather Steering Wheel with Controls OEM 05 06 07 Nice.
Yes there a good way to fix I have a 2000 Mercedes s430 minds was just like your at Walmart auto department I found a good steering wheel cover it had wood trim n leather for around 15.00 at. First I though a but it to small till a friend show me u hav e to install beginning from the top a straight it kind for forfeit on n it look like a from the factory good luck keep in touch
It sounds like the steering wheel lock is in a bind. I suggest you put one hand on the key and the other on top of the steering wheel. You then try moving the wheel slightly to one side then the other as you try to turn the key. It might take a bit of oomph to get the steering wheel to move. I hope this helps.
A dirty or clogged ABS wheel sensor located on the same wheel as bearing replaced. This can be confirmed with a diagnostics check...try a small shop to save money before the dealer for this...Maybe under $100. to replace including the diagnostic...Hope this helps.
Hi, it does sound like your on the right track as the noise gets louder when you turn the wheel. without turning the wheel you should have a slight noise that will get louder when you turn the wheel this would then point me to believ the power steering pump needs replacing.
As your not loosing any fluid then the rest of the steering should be ok so changing the pump will solve your problem, just remember to make sure you bleed the pump properly and the steering properly after fitting the new one as not doing this properly could cause damage to seals inside the rack itself causing more problems than you need so double check you have bled all the air out ok.
Let me know how you get on or if you need further assistance ok
Hope this helps all.... If the key is stuck (won't come out) and the column is NOT locked, one the gear shift there is a plastic sleeve. Put the gear shift in park...slide your hand below the knob and pull that sleeve up! Presto!!! it locks in park and the key comes out. I just put all the stuff i took apart back together... the other solutions may work but this is the first step to check... no tools and you know right away...
Disconnect negative battery cable(10mm).
Insert key and rotate steering wheel until one of the mounting bolts for the airbag are visible from the backside (7/32 or 5.5 mm).Unscrew and rotate 180 degrees until the other is visible.Pry airbag off with a small screwdriver (being very careful) release yellow connector and place airbag aside with leather or vinyl pointing up.
Use a 24mm socket and tighten to 37 ft.pounds.
Reverse procedure to re-install airbag.
Connect cable and remember the computer will have to relearn its settings so car may run different for a while..