Question about 1991 Daihatsu Charade

1 Answer

Idle problem on 91 applause

I own a 91 applause andcleaned the throttle body and now idling very high, have tried to get same throttle body from wreckers but have noticed original body has two large and two small vacuum lines on the top all others have four small lines, have tried this type but vehicle will not run. have recently puy original throttle body back on but it to now will not run. sprayin fuel into intake will keep it running but only if i keep spraying. the bastard will not idle.....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

You may need to adjust your TPS. That is the little black box that hangs off the side of the throttle body.

It should be adjusted so that the switch opens as the TB cracks open.

Posted on Oct 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to set idle because it it too high


idle is preset uses sensors --try cleaning the throttle body use specific cleaner and same with maf sensor --also look at air filter may need changing -i would suggest the air idle control valve but your complaint is high idle not rough or fluctuating with nissian will need to do relearn when done cleaning throttle body
Idle speed to high

Sep 06, 2016 | 2006 Nissan Micra 1.4

1 Answer

Why does my 1990 Daihatsu charade want to cut out and stall when giving throttle unless it's in high rpms it doesn't want to go we've replaced the fuel pump and filter could it be the injectors?


Daihatsu Charade low idle problems Questions & Answers ...

www.fixya.com > ... > low idle problems > Cars & Trucks > Daihatsu
Daihatsu Charade cars & trucks low idle problems questions and answers. ... but idles unevenly with foot on accelerator. does not want to accelerate. please . ... problem daihatsu cherade 1991. when the airconditioner is on the car stalls when changing down to a lower . ... 1990 daihatsu applause 101a 1.6lt 5spd manual.

Daihatsu Charade car keeps cutting out when stop ... - Fixya

www.fixya.com > ... > Cars & Trucks > Daihatsu
Daihatsu Charade cars & trucks car keeps cutting out when stop questions and answers. ... 1997 Daihatsu Charade CS G203 1.5i manual stalling when warm ... gear) while accelerating or when coming to a stop and you take it out of gear and ... 1990daihatsu applause 101a 1.6lt 5spd manual car starts normaly. when auto ...

Nov 17, 2015 | Daihatsu Cars & Trucks

1 Answer

2001 Taurus 3.0 dohc idles high sometimes and once in gear transmission seems to shift at idle.


I think it may feel like that because it is idling high. For you high idle problem there are a few thinks you can look at one a vacuum leak. Two look at the throttle body plate and idle air control motor. If the throttle body plate are dirty the seat for the idle air control motor my be dirty. I would try cleaning the throttle body.

Nov 10, 2013 | 2001 Ford Taurus

1 Answer

E150 idle rough


well this is tough to answer since i don't know the year, but let me just say this
83-90 it's the Throttle Posisition sensor
91-97 it's the MAP sensor + throttle body dirty
97-04 Throttle body is dirty

Nov 09, 2013 | Ford E-Series Van Cars & Trucks

1 Answer

High idle after new throttle body


No, a idle sensor is an electrically-operated valve which allows air to bypass the throttle plate in a fuel injected engine to regulate idle speed. The throttle body sensor is used to monitor the position of throttle in internal combustion engine.-----------------------------------------------------------------------
godiag key programmer

Nov 23, 2012 | Cars & Trucks

2 Answers

High idle then low idle


just do induction / throttle body cleaning - will solve high idle on start up

Nov 12, 2012 | 2002 Chevrolet Impala

1 Answer

Hi I have a 91 Subaru liberty 2.2L auto. I have had the spark plugs & Leads replaced and throttle body cleaned and it still idles rough and sometimes stalls when i pull up when it is in park it idles...


No way, high idle is what caused from a vacumn leak and the stalling leads me to believe it might be the IAC (Idle air control) it is expensive for your car so you might want to get carb. cleaner and try to clean it first, carbon builds up and the either are slow to work or quit working

Jul 27, 2011 | Subaru Legacy Cars & Trucks

1 Answer

IDLE AIR CONTROL


I think there is a recall with idle speed in that year altima. check your dealership for recalls and idle adjustment. if it has high miles try spraying throttle cleaner into the throttle body. (spray it directly in throttle body not the mass air flow sensor on the air box) when its idling. worst case you'll need a new throttle body

May 03, 2011 | 2007 Nissan Altima 3.5 Sedan

1 Answer

Idling problem toyota altis


Either there is a vacuum leak causing the high idle, or
the IACV is bad or being controlled by the computer to make idle speed too high:

To change the IACV refer to the following:
Idle Speed Control (Idle Air Control) Valve Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove the throttle body. Idle speed control valve toy_cor-04-18-1187.gif

  3. Remove the 3 mounting screws from the throttle body. Remove the idle speed control valve and gasket.
To Install:
  1. Using a new gasket install the idle speed control valve on the throttle body with the 3 mounting screws.
    • Tighten 33 inch lbs. (3.7 Nm).
  2. Install the throttle body.
prev.gif next.gif

Jul 16, 2010 | 2004 Toyota Corolla

Not finding what you are looking for?
1991 Daihatsu Charade Logo

Related Topics:

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...