Question about 2003 Dodge Durango

2 Answers

Heater Fan Only Works On High

I have a 2003 Dodge Durango with a 4.7L the fan for the heater/AC only works on high any ideas

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,757 Answers

This is 100% the Blower Motor Resistor, located adjacent to the Blower Motor. This is a common problem with Dodge. I had to replace my own and several dozen others on Chyrsler's, Dodge's, Plymouth and Jeep.

Make sure you disconnect the Battery and wait for 2-minutes to discharge the Air Bag System. Remove your Passenger Side - Dash -Glove Box for easier access.

Let me know if this helped...

Posted on Apr 18, 2010

  • Patrick Rayome Apr 18, 2010

    ps....I am assuming this is the Front and not the Rear Motor...

    I took the liberty to look up the Part/Availability and Price. (NO I do not work for either store/company!)

    At Autozone:

    Part #JA1465 for around $16.

    Part #20300 for around $16.

    At Advance Auto:

    Part #RU1074 for around $26.



×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Dodge Master
  • 3,854 Answers

The fan motor pulled to much current causing the resister to blow and the harness/wire to melt. So for safety reasons I just replaced it all.

Blow motor resistor harness- Part is 05017124AA
Resistor- Part is 05174618AA

Here is a link with pictures to how to replace the harness and resistor.
http://mysite.verizon.net/vzew8gyh/id1.html

Thank you for using fixya and be safe.

Posted on Apr 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?


should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

2005 dodge durango front heater/ac blower motor doesn't work


Check fuses and relays. On relay just switch with one you no works.

Feb 20, 2013 | 2003 Dodge Durango

1 Answer

My 02 durango's A/C & heater fan only works on high. I bought and replaced the panel that contain the fan switch. What else could be wrong


The resistors or the relay . The resistors for all the other speeds are defective. High speed doesn't go threw a resistor that is straight B+.

Apr 01, 2010 | 2002 Dodge Durango

1 Answer

2003 dodge durango front heater/ac blower motor stopped working what can i check beside fuses


Check the Blower Motor Resistor. This controls the Blower Motor/Fan Speed.

Dec 27, 2009 | 2003 Dodge Durango

1 Answer

Blower only works on high


its time for your to replace your blower motor due to secondary fan going out at low speeds.

Feb 16, 2009 | 2002 Dodge Durango

2 Answers

Heater fan switch only works on high


that is a common for dodge you need to replace the relay for the fan switch i only know this because it happend to me three times on my dodge .hope this could help.

Jan 05, 2009 | 1997 Dodge Ram 3500 Club Cab

2 Answers

Blower motor only works on high


This is a pretty common complaint and is almost certainly due to a failed heater fan resistor. 
This is a stepped resistor with taps that set the different speeds on your blower and if any part of it goes bad, the whole thing doesn't work any more and the highest speed is the only one that bypasses this part.
These are often mounted on the fire wall but may not be exposed so you really need a service manual (Haynes or Chilton will do) to locate it in your car.

Nov 20, 2008 | 1999 Dodge Durango

1 Answer

AC/Heater fan control


have a trouble with the fan it won't turn cna someone me what it could be

Sep 02, 2008 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Dodge Durango Logo

1,078 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7254 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...