I you mean you want to change the bulb you should be able to access them through the trunk but if you mean you want to change the lense you will have to remove the rear seat then the package tray then the light.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The button is stuck in? Which button? If it is the flasher button then I would think that is why the brake lights and the flashers don't work. If it is the button behind the brake pedal that is stuck in it should keep the brake lights on and that would stop the flashers from working. I need more clarification on which button you are talking about being stuck.
2000 Pontiac Grand Prix Car Stereo Wiring Guide
Car Radio Battery Constant 12v+ Wire: Orange Car Radio Accessory Switched 12v+ Wire: Yellow Car Radio Ground Wire: Black Car Radio Illumination Wire: Brown Car Stereo Dimmer Wire: Gray Car Stereo Antenna Trigger Wire: N/A Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: N/A Car Audio Front Speakers Location: Dash Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Car Audio Rear Speakers Size: N/A Car Audio Rear Speakers Location: Rear Deck Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue
YES THE PROBLEM ON THESE IS THE MULIFUNCTION SWITCH, ALSO KNOWN AS THE TURN SIGNAL SWITCH. THE SYMPTOM FOR THIS SWITCH BEING BAD IS THE ONE U HAVE ACCORDING TO A SERVICE BULLETIN. PART # ACDELCO D6280A
if the third brake light works and the bulbs aren't blown, it's usually the turn signal switch. it sounds wierd, but that's probably what it is. It is under the steering wheel and is not the easiest or cheapest thing to replace. It should fix your problem, but may hurt your wallet in the process. Guy at work paid 300 to fix his 2000 grand prix with the same problem.
just had the same problem... also noticed that my rear brake lights didn't work... sounds like two separate problems but as I did more research, found that both function off of a "brake light switch" that is located under the dash next to the brake pedal. Have someone look at your brake lights to verify that they are working... If not then most likely same problem I had....
In my case, the wear and tear on that switch caused a small plastic clip on the switch to break such that the brake lever never made contact to trigger the switch to turn on the brake lights and never allowed the cruise to engage.
Probably other potential causes but thought I would add since I experienced cruise control problem recently in my grand prix.
Replacement is very easy... and switch was only $12 at Advanced Auto Parts.