Seats How do I adjust the driver's seat? I can"t see the speedometer! Or maybe I need to know how to adjust the steering wheel.

[PDF]2015 Chevy Malibu Owner's Manual - Chevrolet

https://www.chevrolet.com/.../northamerica/.../2015-malibu-owne... ChevroletApr 1, 2014 - manual and the page number where it can be ... you need to see your owner manual .... To lock or unlock the doors from the ... the seat. 2. Slide the seat tothe desired position and release the handle. 3. .... Do not adjust the steering wheel ....on or off. A white indicator comes on in the instrument cluster.

[PDF]2015 Chevy Spark Owner's Manual - Chevrolet

https://www.chevrolet.com/.../northamerica/.../2015-spark-owners... ChevroletNov 19, 2014 - Headlamp Aiming . .... you need to see your owner manual .... locks. Press K to unlock the driver door or all doors and the liftgate. ... the seat. 2. Slide the seat to the desired position and release the bar. 3. .... Do not adjust the steering wheel... OFF: Turns the rear wiper off. .... If the warning light comes on,.

[PDF]OWNER'S MANUAL - Mini

If adjustment is electric check fuses in fuse box, if it is mechanic you need to take apart steering and seat, in this case is better to go to a garage.

It would appear that the relay is misfunctioning. Try swapping one from nearby and when your car won't start but your seats operate then you'll know what to do. THanks, Dana

I had that problem. I have a 1997 528i, the plug on the side of the drivers seat under the plastic panel came unplugged. I had to just simply plug it back in, steering wheel adjusted and seat moved too. Maybe this is your problem too.

here's what you have to do:
#1. make sure the fuse to the seat adjustment is not blown, its usually a 10 or 15amp fuse.
#2. unscrew the cover to the controls on the driver's seat and make sure the harness is not loose or
broken, if the harness fails to attach to the control board correctly the steering wheel and the
seat adjustment will not work, this harness tends to come loose and even brake over time due to
the constant movement when you get in and out of your car.
I hope this solves your problem.

Rafael Reyes.

check uder or to the sides to move the seat and to adjust the steering wheel there should be a small leaver at the left side of the steering wheel

some of these thing have a thermal overload cut out so it might have come back on by now

i think the seat control unit controls both items. check the connections at this unit to see if they are still securely attached to the unit.

i didn't know your exact model as i could not find the 08 528i and didn't know if yours was LH or RH drive. take a look at the pic and look for box #1 under the seat.

http://www.realoem.com/bmw/showparts.do?model=PU72&mospid=50127&btnr=61_2016&hg=61&fg=25

this might be a faulty preset sensor on the seat. which explains why the sterring wheel and mirrors work on preset but the seat doesn't

Try setting the seat position memory before you switch off.