Question about 2000 Subaru Outback

1 Answer

2000 subaru outback signal lights

Sometimes the signals and hazards would work sometimes not. Now they have stopped altogether. I have replaced the flasher and it didn't help. I saw on a message board that it could be the hazard control switch and ordered it from the dealer. I took the car apart this evening and the plug on the hazard switch on the dash is burnt. The contacts are not melted simply discolored where it appears to have been hot. Is this the switch they are selling me and do you think this could be the problem?

Thanks,

Larry

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Yes these switches can go bad. If it looks bad replace it. I have had switches like this do the same thing after several years of use.

Posted on Oct 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Signal lights only work intermittenly


The blinker relay is getting worn out. It's right behind the hazard lights switch. Pull off the black trim around the radio, hazard, ets, and the relay is write there. Next time the blinkers stop working hit the hazard button or hit the trim just above the hazard lights button. Mines been doing it off and on and I just hit the trim above the hazard button and they start blinking again. Never have time or remember to get a new relay.

Sep 07, 2014 | 2001 Pontiac Grand Am SE

2 Answers

Subaru outback wagon tail light not working off


There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).

The components to check are:

> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch

May 06, 2012 | 1997 Subaru Outback

1 Answer

Where is the electronic flasher location in a 2000 subaru outback


Subaru really doesn't call it a flasher or relay. They call it a hazard and turn signal module. I do not have a picture of it but below is a picture with an arrow as to where it is located and the picture below that on is what the plug or connector looks like and I can tell you that I'm about 95% sure it is a black plug/connector. I hope I was able to help....

3_4_2012_2_22_39_am.jpg3_4_2012_2_22_55_am.jpg

Mar 03, 2012 | Cars & Trucks

1 Answer

Blinkers only work sometimes


chevy had an issue with the blinkers and hazards not working all the time i found that when my turn signals stop working push the hazard switch until they blink then the turn signals start working again. its a faulty turn signal/hazard switch that needs to be replace costs about 30 bucks pretty simple to replace.

Dec 24, 2010 | 2000 Chevrolet Malibu

1 Answer

Can't find the hazard flasher for '93 Subaru Legacy!


they are usually one and the same box fuse...you might try putting in a new one

Mar 01, 2009 | 1997 Subaru Outback

2 Answers

Turn Signal keeps clicking


either the lines are grounded or the lever on your steering wheel is stacking up

Feb 26, 2009 | 2000 GMC Yukon XL

1 Answer

Turn signals work intermittantly


multifunction switch? I think so.

Jan 29, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
2000 Subaru Outback Logo

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...