Question about 2003 Toyota MR2 Spyder

1 Answer

How to replace headlight bulbs on 2001 MR2

I took off the plastics... tried to take out the light but it wont come out.. How do I change the bulbs???

Posted by on

  • ansh32 Oct 07, 2008

    It has a rubber cap on the back... do not need to turn anything.. just pull it out then there is a clip.. remove the clip and the bulb will come off...


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

The bulbs come out from behind the lamp assemblies, unplug the connector and turn it 1/4 turn.

Posted on Oct 06, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Changed gauges and alarm wont go off

check gauges sensor location upper of the oil filter black color take it out clean it well then try it if no change it and don't worry it's cheap

Mar 14, 2014 | 1996 Jeep Grand Cherokee

2 Answers

I have a 2008 aveo. i took off the headlight but i can not get the plastic casing off to change the bulb.

If you are talking about the headlight casing, where the clear headlight casing connects to your back headlight casing, that isn't the way to change the light bulb, you're going to damage the seals that protect water, and humidity.
Here's a good site to visit

Feb 01, 2011 | 2008 Chevrolet Aveo5

1 Answer

2005 Cad CTS. Rear brake light went out. Now the blinker on the same side blinks rapidly. I bought the replacement bulb from Auto Zone and have been able to remove the light kit from the back of the car...

There's about four to six plastic knobs to remove cover facing rear end. Pull the spare wheel cover. On each side in the quarter panel remove plastice knobs. Pull back. Each light has two nuts, remove. Pull light covers and change. Took me a 30 minutes, had to clean out the trunk first :). Good luck!

Dec 01, 2010 | 2005 Cadillac CTS

1 Answer

Help changing dome light bulbs in 2005 Accord

This is a real pain, took me forever to find mine... there is a little TINY slot that you can fit a VERY small flat head screwdriver in to pop it off.

Dont worry, the plastic is durable, just try to use a precision screwdriver if you have one and basically pry it open. it really will just Pop off once you get in there

Jun 28, 2009 | 2005 Honda Accord

1 Answer

Changing headlight

Open the bonnet and look inside behind the headlight, there should be a plastic or rubber cover over the back of the light with 3 or 4 wires coming out of it, the wires should have a multi wired plug on the end of it, pull the plug out by the plastic multi point plug, don't pull on the wires. Remove the plastic or rubber cover and you should see 3 prongs coming from the rear of the headlight, that is the bulb, there are 2 spring clips that retain the bulb, push down on the clip and move towards the centre to release the bulb,
Change the bulb but take notice of where the 3 ppins on the bulb locate as 1 is a bit wider than the other 2 so it should fit only 1 way. put it all back together in the reverse order that you took it apart

May 09, 2009 | 2000 Toyota Corolla

1 Answer

Im trying to replace the reverse lights in my 08 vw gti. I took the plastic cover off the hatch and removed the bulb socket. How do you get the damn bulb out of the reverse light assembly? Do you have...

I have same car 1.remove plastic cover on both sides. 2.There is a connector pinch both sides and pull off 3.twist bulb socket till it pops out 4.bulb itself is a push n turn thats it

May 04, 2009 | 2008 Volkswagen Gti

6 Answers

How do I change the headlight bulb in a Hyundai Entourage? We cannot get at the bulb.

I changed a Right Front low beam bulb this morning on a 2007 Entourage. You have to remove the two bolts on top, use a 10mm socket, then you wiggle side to side and pull the entire headlight assembly forward. The headlight gets caught a little behind the grill so you have to pull sideways a little then forward with a little force. I heard some scraping plastic but nothing broke. Then you remove the black round cap in the back and change the bulb.

Apr 21, 2009 | 2007 Hyundai Entourage Limited Minivan

2 Answers

Replacing license plate lights on Chevy Trailblazer

I just had the same problem. I took the cover off, saw the white bulb base, twisted it to take it out, but it popped back inside the door. I got it out, but it wouldn't pull through, so I twisted it back in place and went to Autozone to get new bulb. Once I saw the new bulb, it was obvious, just the bulb itself pulls out. There's so little room to work, I couldn't get it with just my fingers - - maybe rubber gloves would have worked, but I used pliers, lightly, wiggled it a little and it popped right out. I had a similar issue once with the taillight bulb and had to break the bulb and then grip the remaining filament wires with pliers to get it out, so that was my backup plan, just in case.

Hope this helps others.

Apr 14, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Trying to pull the tail light lens off a 2001 ford escape

Bulbs should be accessible from the inside without removing the lens

Mar 26, 2009 | 2001 Ford Escape

1 Answer

High beam indicator light out. How do I remove guage cluster?

The small plastic trim just pops off,behind them are 4-5 maybe even 6 small screws. i have a 95 F-150 as well and just changed all 17 bulbs that make up your instrument cluster. You can get the bulbs from Ford(cheap). I would recomend doing this when it is warmer outside or indoors where it is warm so you don't break any plastic parts. As well, I recomend you change all the bulbs while you have your dash apart. The manual said I would need to disconect the wiring harness but I was able to contort myself enough to do the deed with the dash laying on its side partly removed. Only took about an hr or so to complete.

PS: if you remove the plastic shroud around the stering column it will give you a bit more room to work.

Oct 30, 2008 | 1995 Ford F150 Styleside Regular Cab

Not finding what you are looking for?
2003 Toyota MR2 Spyder Logo

Related Topics:

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

71231 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7001 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides