Question about 2000 Toyota Tacoma PreRunner

1 Answer

Horn and blinkers quit working

My horn and blinkers quit working. The brake lights work fine. If it is a fuse problem, how do I know which fuse it is?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Consult you owners manual or a repair manual to be certain of which fuse. Or you can always just pull the fuses one at a time until you find the one that is blown (upon visual inpection the metal inside the fuse will no longer be intact). You can also take a test light to check for operation. I prefer one of the first two methods. Hope this helps.

Posted on Nov 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have electrical issues on a 2004 mazda 3.


I would check every single fuse in the car. Blown fuses can cause weird issues like this. While the initial issue with the mechanic does sound like an alarm problem....the rest does not unless the shop that installed it really butchered the job.

Jul 18, 2016 | 2004 Mazda 3

1 Answer

Not working, wipers blinkers,horn,blower


bad fuse, the car has 2 fuse boxes
the cab box is split and is fed from more than one main fuse in the
engine bay main, the other box has blown fuses.
always check all fuses boxes not just one, some cars have 3 boxes.
happy hunting.... use that voltmeter same way in other box.
measure volts on both sides of all fuses and BAM bingo.

Mar 16, 2014 | 1989 Jeep Cherokee

1 Answer

My lights and horn won't work. The first time I rode it, they were working. Now it's the second time and the scooter runs fine but the front lights, turn signals, brake lights, and horn won't work. Any...


the relay switch or fuse (which ever one it uses) should be a fuse but if horn was modified then there would be a relay switch used to bypass every thing(this is how i installed my siren, red & blue lights, new horn) the original lights remain on the original fuse, open fuse box and sinply replace, should say on the panel what fuse it what

Nov 04, 2013 | Cars & Trucks

1 Answer

I have a 91 mazda miata. my horn stopped working, buzzer isnt working and my hazards arent working either. i check to see if it was connecting it was. then i checked the fuses and relays, all were good. i...


Horn and brake lights are on the same fuse. Even if it looks OK replace it with a new fuse to be sure. Your 91 uses a 15-amp large-sized blade fuse for the horn/brakes.


The door buzzer is a separate plug-in module on the fuse box inside under the driver's side dash. If you're not getting any buzzing the whole module can be unplugged and replaced.

Last item to check would be the grounds located under the dash. I'd suggest tracing back from the hazard switch as that's easiest to access (but still not easy) and make sure all the grounds are clean and tight. Then the same for the horn switches in the wheel.

Aug 07, 2013 | Cars & Trucks

1 Answer

Turn Signal/ High Beam Lights/ Driver Window/ Horn suddenly not working! Help!


These are just ideas, but In my simple attempt....start with checking, or have someone check every fuse in the fuse box. Another thought is that the turn signal indicator arm that controls blinkers, high beams has finally gave out. And when it did, it might have shorted out the horn. Being a 1993, it has probably seen some usage. Does the cigarette lighter work?? Also check the fuse in the fuse box that controls the horn, because in some of my experiences, the cigarette lighter and the horn are sometimes on the same fuse.

Jan 10, 2013 | 1993 Cadillac DeVille

1 Answer

I have a 1990 Mercury Cougar. Several problems...Blinkers, hazards, horn, and break lights are not working. However the break light in the back window comes on when the break is pressed. Checked fused and...


I am unaware of what a "CO" display is.
Now with the blinkers, hazard, horn and brake lights not working that may be the multi funtion switch (blinker switch) that is located inside the column (where the blinker lever attaches).
Obviously the blinker, hazard and horn will all work off of something in the column. Brake lights, you may think a switch on the pedal.

the brake lights do work with that switch but when you have the kind of tail lights where a turn signal light shares the same bulb as a brake light, the brake light is cancelled for the turn signal by running through the multi function switch inside the column.
The third brake light does not blink so its not on that same circuit.

Oct 07, 2011 | 1990 Mercury Cougar

2 Answers

My horn just quit working today. Been working


If the relay is clicking,then the horn is the problem,make sure it has a good connection,if so,replace the horn.

Jun 26, 2010 | 2006 Dodge Stratus

Not finding what you are looking for?
2000 Toyota Tacoma PreRunner Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...