Question about 2000 Audi A6

1 Answer

Time and date change

How do I change the date and time on a 2003 A6 2.7T?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi if u pull beside the time and date than figure will flash and than turn right side and keep doing untill ur required date and time
anjum

Posted on Oct 23, 2008

1 Suggested Answer

TDISLine
  • 1874 Answers

SOURCE: how do you change the time and date on a 2005 a6

You can change the clock from the MMI. Press "Car" the "Set Up" then the top right button for "Settings" and the Time option is displayed.

Posted on Sep 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to know which buttons to push on my 2008 Chevy cobalts clock to set the time


Without Date Display
AM/FM Base Radio with a Single CD Player
This type of radio has a button for setting the time. You can set the time by following these steps:
Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press the knob, located in the center of the radio, to turn the radio on.
Press the button until the hour begins flashing on the display. Press the button a second time and the minute begins flashing on the display.
While either the hour or the minute numbers are flashing, turn the knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time.
Press the button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set.
To change the time default setting from 12 hour to 24 hour, press the button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the button again to apply the selected default, or let the screen time out.

With Date Display
Single CD (MP3) Player
This type of radio has a button for setting the time and date.
To set the time and date, follow these instructions:
Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press the knob, located in the center of the radio, to turn the radio on.
Press the button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.
Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, increases by one.
• Another way to increase the time or date, is to press the right SEEK arrow or FWD button.
• To decrease the time or date, press the left SEEK arrow or REV button, or turn the knob, located on the upper right side of the radio.
The date does not automatically display. To see the date press the button while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.

Hope this helps ! hope you had a very Merry Christmas an have Happy New Year

Dec 27, 2014 | 2008 Chevrolet Cobalt

1 Answer

After battery change on my 2001 avalon the time/date reset to default even I set the time/date correctly then turn off the ignition and turn back on again then the time/date reset to default again .


If some connections were changed then the ALWAYS ON +12 volt to the clock circuit back up is not powered all the time . check if while the battery was changed if there was any link that was disconnected that is the continuous supply to the clock.

Jul 02, 2011 | 2001 Toyota Avalon

1 Answer

I don't know how to change the time and date


  1. Press the CONFIG button.
  2. Select Time and Date Settings.
  3. Select Set Time or Set Date.
  4. Turn the MENU/SELECT knob to adjust the highlighted value.
  5. Press the MENU/SELECT button to select the next value.
  6. To save the time or date and return to the Time and Date Settings menu, press the BACK button at any time or press the MENU/SELECT button after adjusting the minutes or year.

Jul 01, 2011 | 2010 Chevrolet Camaro

1 Answer

How do you change the clock on a 2009 Chevy cobalt.


Setting the Clock Without Date Display AM/FM Base Radio with a Single CD Player
To set the time:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press until the hour begins flashing on the display. Press a second time and the minute begins flashing on the display.
  3. While either the hour or the minute numbers are flashing, turn to increase or decrease the time.
  4. Press again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set.
To change the time default setting from 12 hour to 24 hour, press the button until 12H or 24H is displayed. Once 12H or 24H is displayed, turn the knob to the desired option to select the setting. Press the button again to apply the setting, or let the screen time out.
With Date Display Radio with CD (MP3) and USB Port, and Radio with Single CD (MP3) Player
To set the time and date:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.
  3. Press the softkey located below any one of the tabs that you want to change.
  4. To increase the time or date do one of the following: • Press the softkey located below the selected tab. • Press SEEK, or FWD. • Turn clockwise.
  5. To decrease the time or date do one of the following: • Press SEEK or REV. • Turn counterclockwise.
The date does not automatically display. To see the date press while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
  1. Press and then the softkey located below the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays.
  2. Press the softkey located below the desired option.
  3. Press again to apply the selected default, or let the screen time out.

Nov 21, 2010 | 2009 Chevrolet Cobalt

2 Answers

How do I change the time on my clock? 2003 c230.


you have to go in the instrument cluster and go under settings, then scroll through settings until you see date and time.

Nov 08, 2010 | 2007 Mercedes-Benz C230 Sedan

1 Answer

2003 dodge neon was over heating, we changed the thermostat but that did not help. We are thinking its the waterpump and need to know how to change it and if it is true that the timing belt has to be...


never done one but i think its a plastic pulley on a metal shaft which breaks free and this is causing your problem ,not a bad idea to change the belt at the same time though ,then paint teh date and mileage on the timing cover to avoid confusion if car is repaid at a later date

Oct 27, 2010 | 2003 Dodge Neon

1 Answer

After I changed my Toyota Yaris (2006 model) battery, the audio system is dead with message SEC indicated on the screen. How could I resolve this? Thanks. Patrick


Issue with Date & Time Setup... Please enter Date & Time then Unit will turn on .... Press and Hold power wile you pressing on Volume un and down for date and time ...Good Luck

Oct 06, 2010 | 2007 Toyota Yaris

1 Answer

Went on trip, drove a little over 500 miles to destination. When went from one freeway to another car seemed to go into a limp mode after slowing to bout 20- 25 mph. I reset by putting it in park turning...


PO456 is most times a gas cap or gasket,
to get an incorrect gear ratio the transmission has probably started to slip.

Change the fluid and filter first off in the transmission and use only atf+4 fluid and possibly the govenor pressure sensor,and change gas cap.

Jun 02, 2010 | 2003 Dodge Intrepid

1 Answer

Change date & time in the computer BMW530i 2002


If you also have the analog clock in your gauge cluster change the time on it first and the computer shoul set itself after you have changed the time on the analog clock.

Jul 07, 2009 | BMW 530 Cars & Trucks

1 Answer

Date/Time setting - Mile/Kilometer conversion


Hi, The time is set threw your head unit. Go to the settings menu and find a country in the same time zone as you. To change to kilometers, it is set threw your instrument cluster, also threw the setting tab with your steering wheel buttons.

Feb 09, 2009 | 2005 Mercedes-Benz CLK

Not finding what you are looking for?
2000 Audi A6 Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...