a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pretty much the only thing to do is remove the harness you spliced into the incorrect harness and use crimp connectors (the GOOD ones, not those cheap plastic blue ones) to match wire-for-wire and restore the original circuitry. THEN have at the correct harness and reinstall the stereo wiring. It's a PITA all right, but it really is the best way to fix your problem.
Buy wiring kit and radio dash kit from parts store for the paticuliar vehicle remove old radio, splice wires from new stereo to wiring kit, they should be color coded, install radio dash kit plug in wiring harness slide stereo into dash and enjoy
Go to the auto parts store and get a wire adaptor made for a 1992 trueno. It will plug into your factory harness. The wire colors are prematched to your sony and other aftermarket stereos. Just match the wire colors, splice with connectors making sure no wires are exposed. (A little electrical tape for good measure around splices helps). Then it just plugs in. If your factory stereo has mounts that screw onto the radio, unscrew them and attach them to the sony. Remove sleeve from radio and discard. The screw holes are already on the sony.
1999 Hyundai Accent Car Stereo Radio Wiring Diagram Car Radio Constant 12V+ Wire: Red/Yellow Car Radio Ignition Switched 12V+ Wire: Blue/White Car Radio Ground Wire: Black Car Stereo Illumination Wire: N/A Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: N/A Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 5 1/4′ Front Speakers Location: Doors Left Front Speaker Wire (+): White/Red Left Front Speaker Wire (-): Black/Red Right Front Speaker Wire (+): White/Blue Right Front Speaker Wire (-): Black/Blue Rear Speakers Size: 6 1/2′ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): White/Red Left Rear Speaker Wire (-): Black/Red Right Rear Speaker Wire (+): White/Blue Right Rear Speaker Wire (-): Black/Blue
I have put alot of break controlers in and you want it to the out put side of break light switch i always hooked it to the switch. Also wherever i spliced i used heat shrink connectors, even if the wires are different sizes thats just the way i do it, and never had any problems.
all you have to do is remove the trim and checkout the plugs and the wires to see if they are the same and it came out of one caravan to the other you should not have no problem at all because in the wiring one of them is for the cd player also
The whole front plastic cover over the stereo and heater controls is screwed in with two screws at the bottom of the cover, just above the cupholders. Take out those two screws and then pop off the cover, which is held in place by clips up the sides and at the top. There are four bolt/screws that hold the radio/cassette/cd (whichever you have) in place. Unscrew them and replace the stereo. Plugs SHOULD fit, and if they do just replug it and you're good to go. If the plugs DON'T match up, get a wiring harness from Best Buy or Walmart.
But be warned! Just because the stereos look VERY similar and fit very nicely into the other spot in the dash, they may NOT have matching wiring plugs. I just put a 2003 Neon CD player into my 2002 Caravan, and the harnesses didn't match up and neither did the antenna.
Hello, Unfortunately you cannot hook this stereo up with out the original plug that fits into the stereo unit. Once you have that then you could buy an wiring adapter that will break out the wires out of the original harness with labeled wires and you can just match them up and tape them together. Good Luck Rich Lilja