Question about 1991 Honda Accord

1 Answer

Car wont start

Hi there my car will start but the wont turnover it cuts out after i start the ignition, and then i hear a hissing noise from the engine after that like there is a hole somewhere in the engine

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

It sounds like the timing belt snaps based on the hissing sound that you described............if it cranks lightly without much load then it is confirmed the timing belt has snapped.

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hissing brakes


IT is probably a vacuum leak in the brake booster. With the pedal going to the floor There is either no brake fluid or you will have to bleed the system. Replace the booster and bleed the brakes starting at the longest line first

Oct 08, 2013 | Dodge Neon Cars & Trucks

1 Answer

Car wont start


replace fuel filter.listen for fuel pump operation with ignition switch on position for 3 seconds should hear fuel pump running should have humming or churling noise if so fuel pump working if hear no noise fuel pump faulty or could have blowed fuel pump fuse or bad relay.if fuel system okay problem could be ignition timing off due to worn broken timing belt.could have faulty ignition module.bad crankshaft sensor or camshaft sensor best to have vechicle code scan first before buying alot of new parts.could have bad ECM. many things will cause no start problems i.dont know model type vechicle.could have bad spark plugs wires. distributor cap and rotor could be bad.ignition coil could be bad.

Mar 28, 2013 | Cars & Trucks

1 Answer

I have a1994 olds cutlass supreme just started idling high in park checked throttle cable , hear a hissin noise when i move the pvc hose


the hissing noise is a vacuum leak; remedy it by replacing the hose, or if you can, cut off the cracked part and reattach it.

Mar 09, 2013 | Cars & Trucks

1 Answer

2001 e46 325i.misfire on start with lots of smoke for afew seconds and cut off.wont start anymore.what could be the problem?


  1. Check you tachometer while you are cranking the engine and if the tachomoter doesn't move a little bit it could be a faulty crank shaft sensor
  2. Checked Fuel pressure or Ignition ON/Off and listen to fuel pump motor noise, it will operates for approx. 5 sec. when turn On ignition switch and pump will off by it self. if you did not hear any noise from fuel tank, try to swap fuel pump relay. Good luck

Jan 09, 2010 | 2001 BMW 325

1 Answer

98 chev blazer wont start or make any noises...


Listen for a click from under the steering column when you turn the key on. If you hear no electrical click then your ignition switch could be bad. If you hear an electrical click the you starter soleniod is bad.

Jul 13, 2009 | 1998 Chevrolet K1500

1 Answer

2002 Chrysler Sebring Convert wont turnover


If you're not hearing a click from the starter check for a starter relay. May be burned out! DO you hear the fuel pump kick in when you turn the key on? If not something might have triggered your security system and locked you out!

Jun 28, 2009 | 2002 Chrysler Sebring

1 Answer

Wont start


when you turn the key to the ON position you should hear your electric fuel pump come on (a quiet hissing noise) if you dont hear this noise your fuel pump has gone out, if you do hear the noise you might want to check your fuel filter it could be clogged and starving the engine of fuel

Aug 09, 2008 | 2005 Mazda 3

2 Answers

Car wont start but will turnover


ya hi there do you know motor size and year ? can you locate the ignition coil ? if so check to see 12 volts is present when you turn ignition to start position? check all fuses and also check relay's take each relay out and wiggle back in might be a bad connection .

Jul 12, 2008 | 2005 Dodge Magnum

1 Answer

2002 camaro won't start...


hi there it seems that your ignition switch is no good try to replace ignition it relativity a cheap part good luck

Jul 11, 2008 | 2002 Chevrolet Camaro

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...