Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Replacing headlight on a 2000 Ford F250

Burnt out headlight can't seem to get old one off. What is the trick?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

You open the hood reach behind the light assm. and unplug the light grab the lock collar and twist it towards the drivers side and remove then grab the back of the bulb and wiggle up and down while pulling out then reverse the process to install note; do not touch the bulb with anything otherwise shotened light life will result.
Jim

Posted on Oct 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Third altenator ford f250 superduty diesel 2000 4x4, upper alt overcharging


Where are you buying these alternators and how long after installing the hid lighting did the problem start. also how many and which lights, just headlights.

May 25, 2012 | Cars & Trucks

1 Answer

2000 F250 7.3L 4x2 have headlites no tail lites or dashlites


Start by checking the fuses first. But Sounds like a bad Headlight switch.

Nov 19, 2011 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Dash lights quit, gauges and idiot lights work. Help


It's most likely a burnt fuse. Check the fusebox in the cab first. If none of those match the dash, check the underhood fusebox next. A burnt fuse looks like a burnt light bulb. As long as the metal part in the middle is connected it should still be fine.

Mar 02, 2011 | 2001 Ford F350 Super Duty SuperCab

1 Answer

How to remove a headlight from a 2000 f-250


Open the hood, look at the back of the headlight. There is a black sleeve that the head light wires run through, turn the sleeve and slide it back on the wires,unplug wires,& pull bulb out of headlight. reverse procedure to replace bulb.

Oct 05, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Headlights stay on after truck and lights are turned off.


check the wire connections to the switch also the switch itself may have burnt out

May 30, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

2000 F150 parking lights and tail lights stay on


Are you sure they aren't the stoplights (brake lights)? There should be a stoplight switch connected to the brake pedal and replacing it would correct the problem. If it is the tail and parking lights, you must need a new switch that controls them. Signed, 64 year old car guy.

May 11, 2009 | 2000 Ford Expedition

2 Answers

Headlight lens removal


Open hood and look at top back of the assembly and you will see 2 clips. Pull them up and remove,then release the lower clip and pull assembly out.

Apr 08, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

REPLACING LOWER BALL JOINTS ON 2000 FORD F250 4X4 7.3L DIESEL


hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.

Mar 15, 2009 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Hard to crank when cold


you will have to look for your plug
not all came with the frost plug heater but you can add one
i use the ZERO START brand and have had good luck
your local auto parts store should have it
part #
3100043

Nov 11, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...