Question about 1995 Chevrolet Blazer

2 Answers

Fuel problem I've replaced the fuel pump and my 1993 S-10 Blazer, 4.3ltr ran fine that night and quit again the next morning--wouldn't start. Then I replaced the fuel injector system and it worked fine again for one day and quit the next day. What could the problem be? It's getting very expensive! Thank you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Check where you place the fuel pressure gauge this is factory item only it may leak there and into your plentum this fixed mine it cost me like 90 dollars at dealer and dont forget the new plentum gasket

Posted on Apr 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Not to sound silly but #1 are you sure its a fuel problem and #2 have ypu changed the fuel filter?
Jim

Posted on Oct 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1996 ford explorer. It started the other morning just fine and ran good, that afternoon I couldn't get it to start. Changed the fuel filter and it started and ran fine again. Cut it off when I...


first need to make sure you have enough fuel pressure. Hook up a tester and check against the specs. if its too low, then your probably looking at a fuel pump. By replacing the filter, you allowed more fuel to flow. Also, make sure you are getting spark and injector pulse.

Apr 14, 2013 | Cars & Trucks

2 Answers

My 95 s10 blazer w/4.3 vortex wont start again... 1st time last month coil went out ,i changed it ,start right up run for 2 weeks then quit running coasted to a stop in a parking lot thought i ran out of...


it could also be the fuel pressure regulator or fuel filter that is in line or mabey the fuel injection relay i no it will not start if that blows well i hope this help please give a good rating that you

Jul 08, 2011 | 1995 Chevrolet Blazer

1 Answer

Truck ran fine monday and tuesday night...went to start it after we had dinner and it wont start turned over fine couldnt hear fuel pump....waited til weds night and it started just fine ..drove it today...


had a 2000 blazer 4.3 wouldnt start in really cold enviroment..... ended up being the FUEL PUMP RELAY.... it still running good... bout every ther day or so... but it acted like your truck

Dec 25, 2009 | 2002 Chevrolet Blazer

2 Answers

Were can I find the fuel pump collison switch on my 2000 chevy blazer? I quit a week ago started the next morning, quit again yesterday, pump not running relay checks out, jumper pump does not run?


You do not have a switch like a ford. If you have power for three seconds when key switched on and no fuel pressure you will need a pump. I think its the gray wire on yours. Test at the pump connector

Nov 13, 2009 | 2000 Chevrolet Blazer

1 Answer

I have a 1993 chevy blazer 4.3. We replaced the fuel filter and fuel pump. When I start it up it starts okay. Once I drive it and let it sit for about 30 minutes or so it takes a couple of times before it...


Is it a vortec engine if it is your fuel injector may be the problem. Chevy ran one injector on the vortech engine it is under the upper intake manifold, it has 6 plastic hoses running to each cylinder under the manifold. if one of these hoses are leaking its dumping raw fuel into the manifold during hot soak. that fuel is getting picked up by intake air when trying to start. and flooding it out hence hard to start. gasoline evaporates rather quick so what fuel was in the manifold when you park for the night has evaporated by the next morning so no raw fuel for intake air to pick up easy start. Seen this problem many times. pretty easy fix but a bit pricey around $200

Oct 17, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

1997 mpv mini van runs great. While traveling i drove from SC to Atl GA....parked and went into motel for evening...the next morning i had very difficult time getting it re started....Like it was not...


I think you should check your battery and alternator.If they both check good you may have a battery draw,something draining the battery over night.Check your doors make sure they are closing like they should.

Jul 28, 2009 | 1997 Mazda MPV

2 Answers

Stalls / Dies / dead


this engine fuel pump prassurae low. it fuel pump celan. Your problem sovel

Jul 13, 2008 | 2003 Ford E150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...