Question about 1997 Oldsmobile Cutlass Supreme

4 Answers

Brake lights my brake lights doesnt work and the my left turn signal doesnt work...can you tell me what the problem is and how I can fix it?

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a micro switch at the top of the brake pedal that activates the brake lights when you depress the pedal. This switch likely has to be replaced. Any mechanic can do this in about 15 mins.

Posted on Nov 02, 2008

  • excalibr99 Nov 02, 2008

    There is a micro switch at the top of the brake pedal that activates the brake lights when you depress the pedal. This switch likely has to be replaced. Any mechanic can do this in about 15 mins.

×

Change the turn signal switch in the steering column

Posted on Oct 31, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1997 Olds Cutlass Siera SL. Lately my brake lights stay on all the time, after I park the car. I have to restart the engine and pump the brake pedal several times to get the lights to turn off.

Posted on Oct 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

GET THEM FIXED OUT OF HALFORD

Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ml left blinkers and left back brake light doesn't work either any advise?


Check the bulb. If the signal light is a brake/signal double contact bulb, it may be burned out

Mar 07, 2016 | Cars & Trucks

2 Answers

My brake lights and both signal lights do not work. I tried replacing a bulb in the signal light to see if it was just burnt out but it doesnt work. Why would they all stop working at once?


The most common cause would be the turn signal switch.
You would need to check for power in and out of the brake light switch, then the turn signal switch to find the problem.

Apr 14, 2015 | 2005 Pontiac Sunfire

2 Answers

Where is the fuse located for left brake light on fuse box


Brakes are generally not fused seperately. Have u check the bulb in the left side.

Sep 15, 2014 | Cars & Trucks

1 Answer

1986 bronco left taillight


If you are not getting power from the headlight switch for that circuit, but the other side works, you'll have to trace the wiring. The socket has two wires plus a ground. One wire is for the tail lamp circuit and the other is for brake-turn signal.

Apr 30, 2013 | Ford Bronco Cars & Trucks

1 Answer

My right side turn signal cuircut works but my left side doesnt ive checked the light bulbs but they're all good.


if hazard lights are ok and you can see all are working, you can tell that your signal lever switch is broken.

Nov 18, 2011 | Cars & Trucks

2 Answers

Left turn signal doesnt work and my brakelights


  1. Check the fuse make sure it is not busted and also use a designated amp only.
  2. Check the bulb and the wires also.

Mar 28, 2010 | 1997 Chevrolet Lumina

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

Rear brake lights don't work


you prob got a trailer plug prob bad wires if not tail lights run through turn signal switch tell fix ya bout me ok

May 23, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

3 Answers

No turn signals or brake lights on left and right but brake light on top


I agree. My brake light dont work. Only the third brake light does. The running lights work but when i apply the brakes the rear tails dont light up.
I currently have this issue along with the signals dont work unless I bang the top of the steering colum. The hazard switch doesnt work either. If the signals dont work it makes this very quick clicking sound on the passenger side. I checked the fuses and they are good. The bulbs still work. The brake switch works cause the third brake light goes on. And seeing as I am having a problem with signals.....GM says I have to replace the switch in the steerg colume. Its a little box about the size of a cigarette pack. If you take apart the panels off ( right behind the steering wheel, where the hazard switch is) ...that is where it is located. Its plugged into the signal lever. Hope this helpa....Good luck everyone with this issue.

Oct 17, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1997 Oldsmobile Cutlass Supreme Logo

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...