Question about 1993 Toyota T100

2 Answers

Knock sensor needs to be replaced where is it located and how long would it take to replace?

Posted by on

  • Anonymous Oct 11, 2008

    on my 96 avalalon it was a broke wire that connected to the knock sensory making the knock sensory light come onto .

  • Anonymous Mar 11, 2009

    the knock sensor if you have the v6 is right under the manifold i heard im goin to the same process expensive little ******

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On a 3.0 V6, This is not an easy process! It is located under the lower intake manifold, in the center of the V of the engine, between the heads

Posted on May 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

It's located on cylinder block .

it's easy to replace it

Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 nissan sentra sx 200 knock sensor location


Melvia, Knock sensor located under the intake manifold between cylinder #2-3 I believe, hard to change with out removing intake manifold, but can be done. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1995 1999 Nissan Maxima 1 2 Knock sensor replacement
KA24DE Knock Sensor Code 34 FREE REPLACEMENT How To
Knock sensor on 1995 Altima
Get the Best Priced Nissan Sentra Knock Sensor

Aug 21, 2016 | Nissan Cars & Trucks

1 Answer

04 Chevy avalanche knock sensors location


Nathan, 2 Knock's are located under intake manifold.
Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Engine Knock Sensor 2000 06 5 3L Silverado Sierra...

Knock sensor 5 3 4 8 6 0 replacement

05 Chevy Avalanche Knock Sensors

4 8 5 3 6 0 knock sensor replacement GM



Mar 06, 2016 | Cars & Trucks

1 Answer

2005 suburban 5.3 engine where are knock sensors located and how do you replace them


two knock sensors.under phlemm assy. replace cover gasket, two sensors and wire harness.

Jan 27, 2013 | 2005 Chevrolet Suburban

1 Answer

Were is the knock sensor on 2002 protege5 2.0L


The knock sensor is located under the intake manifold to replace do the following
Disconnect the negative battery cable.
Remove the intake manifold.
Disconnect the sensor connector.
Remove the sensor from the engine block.
Installation is the reverse of the removal procedure

Sep 28, 2012 | 2002 Mazda Protege

1 Answer

Where are the knock sensors located on my 05 Tahoe?


THE KNOCK sensors are located below the intake in the valley of the engine. to replace them you will need to remove intake assembly to gain access. this vehicle has two knock sensors i recommend replacing both of them while in there.

Jan 17, 2011 | 2005 Chevrolet Tahoe

1 Answer

Knock sensor replacement ....2003 kia rio....emissions ...obd II....failure...need to pass inspection...failure code P0325 (Knock sensor 1 circuit malfunction)....where vis the knock sensor located on a...


Turn ignition off. Disconnect knock sensor 3
-
pin harness connector. Locate knock sensor, on cyli
nder block.
On Optima 2.7L engine, sensors are located on both
sides of cylinder block. . Remove knock
sensor from cylinder block. To install, reverse rem
oval procedure.

Mar 19, 2010 | 2003 Kia Rio

4 Answers

Need to locate knock sensor on 1999 camry V6. Where is located.


i have toyota windom 4vz-fe i need locate knock sensor

May 31, 2009 | 1999 Toyota Camry

1 Answer

Need how to and location to replace knock sensor


Im looking for the same part location on a 2002 chevy blazer. It might be under the distributer cap.

May 30, 2009 | 2001 Chevrolet Blazer

1 Answer

1986 jetta oil pump location and replacement/knock sensor


oil pump is in the oil pan and if you have no or low oil pressure replace pump before doing anything with knock sensor. knock sensor is more or less a microphone and listens for spark knock but will set codes for any knocking or tapping noise which is commonly heard if oil pump is malfunctioning

Mar 20, 2009 | 1986 Volkswagen Jetta

1 Answer

Need to locate knock sensor on 3.1 2000 chev lumina


knock sensors are not worth replacing. Most of the time the knock sensor is just reacting to somthing else causing it to react.


http://autos.groups.yahoo.com/group/villagerquest/

Nov 21, 2008 | 2002 Nissan Quest

Not finding what you are looking for?
1993 Toyota T100 Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...