Question about 1997 Mitsubishi Eclipse

Open Question

MagNa StallS aND DieS, DaSh lightS, low beam goNe, but No blowN fuSeS.

The miSSuS weNt to the SeRvo, afteR we had Put a New batteRY iN, (Neg fiRSt, theN PoS) hit a Pot hole, aND SaiD that afteR that, wheN You take YouR foot of, the RevS DRoP, theN the caR StallS. (auto). the DaSh lightS aND the low beamS aReN't woRkiNg, eveRYthiNg elSe iS. theRe'S No fuSeS blowN, aND No iDea, what the StoRY iS. mitSubiShi magNa executive 97 vl wagoN 6cYl automatic. it'D be gReat if You caN helP. thaNx.

Posted by on

6 Suggested Answers

MarkTSI92TLN
  • 37 Answers

SOURCE: my headlights only work on highbeam.

Yes there is a relay switch that allows the low to high beam switch to occur. It shoud be mounted under the hood along the firewall. Check your manual too!

Thanks,

Mark

Posted on Dec 30, 2008

  • 166 Answers

SOURCE: my headlights only work on highbeam.

you may need 2 new head light globes it is not uncommon for both low beam filaments to blow around the same time may be check the globes before getting to carried away with relays ect.

Posted on Jan 01, 2009

  • 202 Answers

SOURCE: my 1991 mitsubishi magna wagon stalls when in reverse, appears to not get enough fuel? Sometimes stalls in idle at times as well. Can't find the fuel filter (if there is one)...help!

i am not positive on the fuel filter location on the forieng cars but thy usually put them in the back by the fuel tank
i hope this helps you in some way.
but yes all cars have fuel filters

Posted on Apr 21, 2009

  • 2 Answers

SOURCE: my 1991 mitsubishi magna wagon stalls when in reverse, appears to not get enough fuel? Sometimes stalls in idle at times as well. Can't find the fuel filter (if there is one)...help!

hey the fuel fillter is behind the intacke plenium follow the fuel rail delivery line and ull find a big steel canister thats ur fuel fillter

Posted on Jun 08, 2009

  • 490 Answers

SOURCE: Mitsubishi TH Magna 4 door Disassembling the

if you dont see any(look real hard) then you probably can just pull up or out and it will just come out,Some dashes after 2000 are pushed in type.

Posted on Jul 23, 2009

  • 840 Answers

SOURCE: highbeams/turn signals not working!!!

Look at the bulb sockets from the wiring when you push them in the wires cann ot be pinched between 2 things it will cause a short.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lights blown


Well the dash lights and headlights are on two different circuits, but both are controlled by the headlight switch.
Do you have power in and out of the switch for both circuits ?

Jun 21, 2013 | 2005 Saturn Vue V6

1 Answer

1984 nissan pup - hihg beams work but not low beams, dash lights out, tail and brake lights out, fule pump works. what the heck is going on?


main power issues .. check battery connections.. check fuseable link wires under hood,..check fuses in fusebox for blown fuses and check wiring harnes ground connections especially by the headlights..

Feb 10, 2013 | 1984 Nissan Pickup

1 Answer

I have a mazda 6 that has a headlight problem, low beams do not work and high beams do. It started with one light goning out and next time i started the car the second one went out. Also front makers went...


if your vehicle has H4 headlight bulbs fitted you will find that they have both high & low beam filaments in them,what has most likely happened is that the low beam filaments are blown & the bulbs need to be replaced, also you may find that high & low beam circuits are on separate fuses, & also the front markers may have there own fuse check the fuses as well.......hope this helps......cheers.

Aug 17, 2011 | Mazda MAZDA6 Cars & Trucks

1 Answer

2005 hundai (korea) sonata ~~~ headlamps will not come on with low beam~~~fog/parking lights work and high beam work. inside dash info panel show low beam as being on as does high beam when turned...


3 choices,bulbs gone......fuse blown.....dip switch gone,check cheapest FIRST.(are you sure your sonata was made in Korea as most are made in CHINA.its the largest TAXI fleet in the WORLD.)

Mar 29, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

I have a 2002 Hyundai Accent the Alternator went out and replaced that and it started just fine acept for the following: The low beams on the head lights work high beams ( but the low beams don't work )...


It sounds like a blown fuse. Are you checking them with a test light? And have you located all of the fuses. there will typically be a fuse box under the drivers dash area, and one under the hood. have another look Im certain you'll find a blown fuse. Good luck.

Jan 20, 2011 | 2002 Hyundai Accent

1 Answer

Low Beam Lights won't work. High Beam works fine.


hey
id say check your fuses, if the two lights went at once then its more than likely a case of changing the blown fuse. The fuses are located usually under the dash on the drivers side with some also in the engine bay.
good luck

Dec 30, 2009 | 1996 Pontiac Sunfire

2 Answers

Engine stalls(dies-down) upon blinking the headlights...


you have a bad ground,or a battery voltage that is so low,that the 20 amps from the high beams circuit is pulling the voltage down so low that the ignition can not run properly.
put on the rear defogger,does it do it? if not,look for the ground junction common to ignition and the high beam circuits.

Sep 09, 2009 | 1995 Cadillac DeVille

1 Answer

Dash borad lights out


Were the fuses blown. If not it's the probably the bulb. If the fuses were blown check now to see if the new ones have blown again. If they have then their is a short in the wire. Let me know how far you have gone with the repair so I can direct you further.

Aug 24, 2009 | 2005 Chevrolet Aveo

1 Answer

Remote key lock stopped working after wal mart put new battery in and now my head lights stopped workin!!!


check fuse for low beam, then possibly both low beam globes. they could have blown.
the key remote may need reprograming into system try put key in ignition in on position then press remote buttons a couple of times then try if no good need to go to dealer to be programed into system again or it needs repairing/replacing.

May 31, 2009 | 1996 Chevrolet Camaro

Not finding what you are looking for?
1997 Mitsubishi Eclipse Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...