Question about 2007 Ford Econoline

1 Answer

Heater switch replacment - 2007 Ford Econoline

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,871 Answers

Hello! it's my job to make things as easy for the customer as possible...Therefore I must ask why you want to replace the heater switch? Is it because you have lost one or two of the switch speeds? Your vehicle is noted for loss of the Blower Motor Resistor...
Changing the Heater switch means removal of the Climate Control Assembly which is not the easiest of jobs...I've included the process...But are you sure the blower resistor is OK? If you have lost 1,2, or all blower motor speeds it's more than likely the Resistor pack. And a lot easier to change...
Guru...saailer


Remove climate control:





heater switch replacment - 12_26_2011_2_15_09_am.gif

  1. Remove the instrument cluster finish panel...
  1. Remove the 3 climate control assembly screws...
  1. Disconnect the climate control assembly vacuum connector...
  1. Disconnect the 5 climate control assembly electrical connectors...
  1. Remove the climate control assembly..
Removal of blower motor Switch:
  1. Remove the climate control assembly.
  1. Remove the blower motor switch knob.
  1. Remove the blower motor switch.
    1. Remove the screw.
    1. Remove the blower motor switch.

Removal of blower motor Resistor:



Blower Resistor is under the battery tray...

MOTORCRAFT Part # YH1698 ...cost $25

12_26_2011_2_28_50_am.jpg

Guru...saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Posted on Dec 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the heat blend actuator because I was not getting any heat. Now, after replacing, all I get is hot air and no cold. The A/C was working fine just before replacing.


Do you have Manual Climate Control System or Dual Automatic Temperature Control System ?
The temperature control switch:
  • is a potentiometer that outputs a variable voltage to the temperature blend door actuator to set the position of the temperature blend door.
  • initiates closing of the heater control valve. When set to full COOL, a lever on the temperature blend door pivot shaft depresses the pintle of the heater control valve vacuum switch. The heater control valve vacuum switch then applies vacuum to the heater control valve, closing off engine coolant flow to the heater core.
  • is serviced only with the climate control assembly.
You may have disturbed something when changing the actuator , the vacuum switch o vacuum hose .

Oct 21, 2015 | 2005 Ford Explorer XLT

1 Answer

My 2005 GMC C7500 heater is not blowing hot air. The fan is working fine, but it seems we can'[t get it to switch to heat. We replaced the in dahs switch assembly thinking the switch just wasn't...


It is probably the blend doors in the heater case not opening correctly. They are probably vacuum operated doors.


Check the heater core by feeling both heater hoses (the inlet and outlet) when the engine is at normal operating temperature. Both hoses should feel hot, meaning the heater core is circulating coolant correctly. If only one hose feels hot, the heater core may be plugged up, or it may have an air block.

If the heater core checks out good, check the heater case doors for proper movement when you switch from cold to heat. Several vacuum lines branch out from back of the control unit to vacuum canisters on the case, which open or close the various doors. These doors used to be only cable operated, but most are now vacuum operated. There should be a single vacuum hose from the engine, into the firewall, and then to the heater control unit in the dash, where hoses distribute the vacuum signal to various doors or vents as demanded by the switch settings.

Oct 24, 2014 | Cars & Trucks

1 Answer

Why blower fan won't turn off after i turn off ac/heater


You relay switch is stuck on. Replace it. Second thing to check is the fan switch may need to be replaced. If you turn off your engine and then back on does the heater fan go on even when it is turned off at the switch?

Jun 22, 2014 | 2006 Ford Explorer

1 Answer

Can you fix a windshield wiper switch and heater core at the same time in a 98 s10?


There not related,so doing the heater core doesn't doesn't make the wiper switch easier.Click here to see.Here's the heater core.

Feb 13, 2013 | 1998 Chevrolet S-10 Pickup

1 Answer

High speed doesn,t work on heater switch.


Pull the heater control panel out of the dash and inspect the blower speed control switch, look for signs of a burnt connector to the switch, it will be discolored looking, if this is the case replace the switch and install a repair connector

Jul 19, 2012 | Cars & Trucks

1 Answer

Heater will not switch to floor vent


Heater door diaphram not working, either has a vacuum leak or the main control needs to be replaced. The A/C-Heater switches work with both electricity/vacuum at the same time, the switch may be bad, replace it.

Oct 20, 2010 | 2003 Chevrolet Blazer

3 Answers

Why won't my car heater shut off


You have a short in the switch or resistor pack. replace the switch

Feb 03, 2010 | 1999 Oldsmobile Intrigue

1 Answer

My 95 jeep cherokee heater switch on ly works on high


I would try to replace the blower motor resistor first,If that doesnt repair your problem you may wanna try replacing the blower speed switch.The resistor is located under the passenger side of the dash mounted in the heater box.

Jan 30, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Heater motor only runs on high


Replace the heater blower resistor.

Dec 26, 2008 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2007 Ford Econoline Logo

1,056 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...