Question about 2002 Chrysler Town & Country

1 Answer

Brake light stay on

My brake lights stay on and a white box has come off of my brake somewhere. If I push the black button the lights go off. Can someone tell me how to put it back?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 76 Answers

This is your brake light switch, it locates above the brake pedal, and the blake button is depressed when you push the brakes on. it goes on the left side of the pedal arm and is notched into place by turning it

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get my brake light to turn off got to get ready for a brake and lamp inspection


It sounds like The switch on brake pedal is stuck in.look up in the foot well a little way up you will see a switch that pushes onto brake pedal when the brake pedal is pushed it releases a little button that activates lights.if button is sticking lights will stay on. Give a squirt of wd40 and give button a few pushes then check lights hope this helps

Jun 04, 2015 | Cars & Trucks

1 Answer

Brake lights stay on 2001 hyundai elantra


probably switch at the brake pedal, have somebody stand behind and lift the pedal and see if it goes out, check the switch it may be out of line with the pedal. most likely it works by a button that is pushed when you push the pedal. if it is not this switch then you may have a short somewhere across the brake wire

Feb 05, 2014 | 2005 Chevrolet Impala

2 Answers

Why wont my brake light turn off... they are on all the time


You most likely have a faulty stop light switch. I have provided you with a couple of pictures. The first one in black and white is where you will find the switch and the second one is a picture of what your switch should look like but may not be what is in the car but you will get the idea. What happens is when you press the brake pedal a little button on the switch opens and when it opens it completes an electrical circuit and turns the brake lights on. when you let off the brake pedal the pedal comes back up and pushes that button back in to close the circuit. it is most likeley stuck open and not pushing back in when the pedal goes back up. When you see it you will understand better. I hope this helps you and good luck.


clifford224_136.jpgclifford224_137.jpg

Mar 12, 2011 | 2001 Ford Taurus

3 Answers

MY BRAKE LIGHTS STAY ON WHEN MY CAR IS OFF


Behind the arm of the brake pedal on older cars is a black box with a push button that turns on your lights. You maybe able to free it up by pulling it out, but most of the time they have to be replaced as there is no way to open them up and clean them up.

Feb 21, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

Brake light switch replacement brake lights stay on in 1990 toyota corolla


IF YOU ARE SAYING THAT YOU HAVE REPLACED THE BRAKE SWITCH AND NOW THE BRAKE LIGHTS STAY ON THEN THE PROBLEM IS THAT YOU DID NOT SCREW THE BRAKE SWITCH IN FAR ENOUGH.IT HAS A BUTTON ON THE TIP OF THE SWITCH AND IF THAT BUTTON DOES NOT REST ON THE BRAKE PEDAL,YOUR BRAKE LIGHTS WILL STAY ON.WHEN YOU PUSH ON THE BRAKE PEDAL THE BUTTON POPS OUT OF THE SWITCH WHICH MAKES THE LIGHTS TURN ON.WHEN YOU RELEASE THE BRAKE PEDAL,IT GOES BACK UP AND PUSHES THE BUTTON BACK IN WHICH MAKES THE LIGHTS GO OFF.ALSO MAKE SURE THAT YOUR ELECTIRCAL PLUG IS CONNECTED SECURELY AND ALL THE WAY PLUGGED IN.I HOPE THIS INFO HELPS, TAKE CARE AND GOOD LUCK, MANNY

Jul 08, 2010 | 1990 Toyota Corolla

1 Answer

Brake lights stick on


It sounds like the brake light switch down on the brake pedal is stuck and it needs replaced,Its got like a push button setup when you apply the brakes the brake pedal pushes the brake switch button in brake lights come on and when you relase the brake pedal the button on the switch comes back out and brake lights go out but if switch is worn out or sticking the lights will stay lit even when off the brake pedal so just replace the brake light switch down on the brake pedal.

Apr 20, 2010 | 1992 Dodge Dakota

1 Answer

Brake lights come on and stay on when started.Recently replaced left brake light bulb


It sounds like the brake switch on the brake pedal arm is stuck its like a push button type switch when you press the brake pedal down it pushes the button in on the switch which makes the brake lights come on,when you take your foot off the brake pedal the button is supposed to come back out if it doesn't the brake lights will stay on.

Apr 09, 2010 | 2002 Audi A4

4 Answers

Brake Lights Stay On When Car Is Off


Is it the brake light or the tail light? Does it go out when you pull back on the brake pedal?

Jun 21, 2008 | 1996 Honda Accord

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...