Question about 2000 Audi TT

2 Answers

The radio is safe, how to reset again - 2000 Audi TT

Posted by on

  • asormar Oct 04, 2008

    It ease but be careful you have only 3 opportunities. When you use the button 1 to 4, in each button press until you got the the proper number. This solution have a cost of US$ 10. Please pay mi, Ha Ha

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Our 2001 TT doesn't have a button P.SCAN, but rather SCAN. Also, it has a RDS button, but not a RBDS one. Pressing and holding the SCAN and RDS buttons together did not work. Some one else has suggested holding the FM1 and 2 buttons along with the Dolby button. This didn't work either. I have the code, but no way to enter the mode to set it, Very furstrating!!

Posted on Aug 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have an 2002 audi tt,radio on safe mode.need help please


did you check manual if there is radio code card ?
if you do not have it, you two choices either visit dealer and they will be able to obtain correct code for your radio or try to contact Panasonic and find out their repair shop for automotive radios they will be able to reset for you they even might disable the safe mode so in case power loss you will not have to re-enter again

Oct 13, 2014 | Audi A6 Cars & Trucks

1 Answer

My 2004 jetta radio says 2 safe, what do I have to do to reset the radio in order to get it working again?


Now you must turn ON the radio, and let it turned ON for at least one hour. Then the radio will say only "SAFE".

IMPORTANT NOTE:
You must have the security anti-theft code for your Volkswagen radio from the car manufacturer, or from a Volkswagen dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for a 2004 VW Jetta radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Aug 31, 2011 | 2004 Volkswagen Jetta

2 Answers

I got an Audi TT Turbo Model 2000 The radio Bose Audi concert is giving safe on the screen and nothing else what should I click on to reset the radio so I can put the code.Thanks


  1. Turn on radio. The radio display shows "SAFE".
  2. Press the FM2 and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the FM2 and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.

May 29, 2011 | 2001 Audi TT

2 Answers

How do you reset a 1999 Audi radio code Read more: http://wiki.answers.com/Q/How_do_you_reset_a_1999_Audi_radio_code#ixzz1BBivzkQU


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
Please do rate my response. Thanks!

Jan 16, 2011 | 1997 Audi A8

1 Answer

My Audi A4 went onto safe mode when I had some engine work done. How do I reset the radio?


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for 2000 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
Please do rate my response. Thanks!

Jan 16, 2011 | 2000 Audi A4

1 Answer

My Audi A4 went onto safe mode and I put the wrong code into the radio. It has now gone back into safe mode and will not let me put in the correct code. How do I reset completely?


Wait one hour before attempt to put again the correct code!!! Now the radio is under anti-theft protection. IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for 1997 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
Please do rate my response. Thanks!

Jan 09, 2011 | 1997 Audi A4

2 Answers

JUST BOUGHT 1999 AUDI A6 QUATTRO WITH CONCERT RADIO IT'S IN SAFE MODE DEALER WANTS 100 TO RESET CAN ANYONE HELP ME?


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Oct 09, 2010 | 1999 Audi A6

1 Answer

How do you enter code to reset 1999 A4 Audi 2.8 Quattro Radio ? Needs help. Please.


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert Radio the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit. 5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Sep 16, 2010 | 1998 Audi A4

2 Answers

Okay. So my 1995 Volkswagen stereo is in safe mode and everytime i press the two buttons, it just blinks and won't let me enter the code anymore. How do I fix it?


With the radio in safe mode, you have to disconnect the battery again to reset the radio so you can enter the right radio code. If you don't have the radio code or it's wrong, keep me posted. be glad to help you get your radio working again. Good luck, friend.

Jul 22, 2009 | Volkswagen Jetta Cars & Trucks

1 Answer

BMW 318 would not start this morning Error code 2BOA?


I think you need a new battery.
Replace it and the radio will probably reset ok when you input the code..

Jul 09, 2009 | 1996 BMW 318

Not finding what you are looking for?
2000 Audi TT Logo

805 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...