Question about 1993 Chevrolet Beretta

1 Answer

Fuel pump I am going to install a fuel pump in a 1993 Chevy Berretta I want to know any precautions before installing the new pump

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 61,037 Answers

Make dam sure you ground the fuel tank and avoid making any sparks.

Posted on Oct 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy truck 3500 check wiring on fuel pump harness


images for 2000 chevy truck 3500 check wiring on

How to Install New GM Wire Harness on Fuel Pump Module ...

? 3:10
https://www.youtube.com/watch?v=FffdzqknP3k
Apr 20, 2012 - Uploaded by Airtex Pumps
This video is about how to install a new Airtex fuel pump module into some GM ... fuel pump and gas tank to a 98 internal fuel pump and gas tank on my truck 88 gmc. the wires are a little different. .... Check the power & ground at the pump. ... CHEVY SILVERADO FUEL PUMP CHANGE OUT.2500HD 2001.

How to test an electric fuel pump - YouTube

? 13:54
https://www.youtube.com/watch?v=Q3ZiTsKCdO8
Feb 3, 2012 - Uploaded by ScannerDanner
2001 GMC 3500 8.1L engine with no fuel pressure. In this video I am showing how to test the fuel pump electrical circuit using atest light and scan tool. ... seconds on the ground wire. when i unplug the harness from the the fuel pump .... need help newfuel pump chevy venture 2004 runs for a few days then ...

How to Install Fuel Pump E3947M in 1997-2000 Chevrolet ...

? 5:53
https://www.youtube.com/watch?v=9LLLRVnItbI
Apr 20, 2012 - Uploaded by Airtex Pumps
Applications: 2000-97 CHEVROLET/GMC C, K 1, 2, 3 TRUCK 262... Please check out our 'How to Install New GM Wire Harness onFuel Pump ...


Jan 22, 2016 | Cars & Trucks

1 Answer

1993 chevy caprice classic wagon 5.0 8 cylinder hads a problem with engine shutting off with in seconds after start ! i did check for vapor lock in gas line, had new spark plugs replace, new fule...


Think the oil pressure switch keeps the fuel pump running once started. Suggest replacing Oil pressure switch. And no it won't effect oil pressure reading when it goes bad. The switch is a safety device. When you roll it over and the oil pressure drops the switch cuts off the fuel pump. Neat huh? Need some good feedback Thanks!

Jul 21, 2011 | 1993 Chevrolet Caprice

1 Answer

How to change a fuel pump on a 1992 Toyota carolla


Electric Fuel Pump-Fuel Injected REMOVAL & INSTALLATION The electric fuel pump is contained within the fuel tank. On 1988-92 models, it is necessary to remove the fuel tank from the vehicle in order to reach the pump. On 1993-97 models, the fuel pump can be accessed by removing the rear seat cushion and service hole cover. 1988-92 Models Fig. 1: Exploded view of the electric fuel pump 88275g77.gif
NOTE: Before disconnecting fuel system lines, clean the fittings with a spray-type engine cleaner. Follow the instructions on the cleaner. Do not soak fuel system parts in liquid cleaning solvent. CAUTION
The fuel injection system is under pressure. Release pressure slowly and contain spillage. Observe "no smoking/no open flame'' precautions. Have a Class B-C (dry powder) fire extinguisher within arm's reach at all times.
  1. Disconnect the negative battery cable and relieve the fuel pressure. Remove the filler cap.
  2. Remove the fuel tank from the vehicle.
  3. Remove the fuel pump bracket attaching screws, then remove the fuel pump/bracket assembly from the tank. Fig. 2: Remove the bolts retaining the pump bracket to the fuel tank 88275g78.gif

  4. Pull the lower side of the fuel pump from the bracket.
  5. Remove the nuts attaching the wires to the fuel pump.
  6. Disconnect the hose from the pump.
  7. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip. Fig. 3: Pull off the lower portion of the pump from the bracket 88275g79.gif
    Fig. 4: If necessary, remove the clip and pull out the filter to replace it 88275g80.gif

  8. While the tank is out and disassembled, inspect it for any signs of rust, leakage or metal damage. If any problem is found, replace the tank.
  9. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  10. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration. To install:
  11. Install the pump filter using a new clip. Install the rubber cushion under the filter.
  12. Connect the outlet hose to the pump, then attach the pump to the bracket.
  13. Connect the wires to the fuel pump with the nuts.
  14. Install the fuel pump and bracket assembly onto the tank. Use new gaskets.
  15. Install the fuel tank.
  16. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
1993-97 Models CAUTION
The fuel injection system is under pressure. Release pressure slowly and contain spillage. Observe no smoking/no open flame precautions. Have a Class B-C (dry powder) fire extinguisher within arm's reach at all times. Fig. 5: Exploded view of the fuel pump components 88275g81.gif
  1. Disconnect the negative battery cable. CAUTION
    On models with an airbag, wait at least 90 seconds from the time that the ignition switch is turned to the LOCK position and the battery is disconnected before performing any further work. Refer to Section 7 for all air bag warnings.
  2. Relieve the fuel pressure.
  3. Remove the rear seat cushion.
  4. Remove the floor service hole cover. Fig. 6: Remove the 4 service hole cover retaining screws 88275g82.gif

  5. Disconnect the electrical fuel pump wiring at the fuel pump assembly. Check for any fuel leakage while in there.
  6. Remove the gas cap, this will prevent any fuel gas spilling out of any high pressure lines.
  7. Using SST 09631-22020 or an equivalent line (flare nut) wrench, disconnect the outlet pipe from the pump bracket. Fig. 7: Disconnect the outlet pipe from the pump bracket 88275g83.gif

  8. Remove the pump bracket attaching screws.
  9. Disconnect the return hoses from the pump bracket, then pull out the pump/bracket assembly.
  10. Remove the nut and spring washer, then disconnect the wires from the pump bracket.
  11. Remove the sending unit attaching screws, then remove the unit from the bracket. Fig. 8: Pull the pump bracket with pump attached from the tank 88275g84.gif

  12. Pull the lower side of the fuel pump from the bracket.
  13. Unplug the connector to the fuel pump.
  14. Disconnect the hose from the pump.
  15. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip.
  16. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  17. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration. To install:
  18. Install the pump filter using a new clip. Install the rubber cushion under the filter.
  19. Connect the outlet hose to the pump, then attach the pump to the bracket and tighten to 22-25 ft. lbs. (29-34 Nm).
  20. Engage the connector to the fuel pump.
  21. Install the fuel sending unit to the pump bracket.
  22. Install the fuel pump and bracket assembly onto the tank. Use new gaskets. Tighten the pump bracket retaining screws to 34 inch lbs. (4 Nm).
  23. Connect the return hoses to the pump bracket.
  24. Install the service hole cover, then the engage the fuel pump and sending unit connector.
  25. Install the rear seat cushion.
  26. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
prev.gif next.gif

Jan 24, 2011 | 1992 Toyota Corolla

1 Answer

I need to replace a thermostat in a 2000 Chevy 2500 6.0 liter pickup


4.8L, 5.3L and 6.0L Engines To Remove:
CAUTION
The thermostat is not serviceable separately. The thermostat housing (water pump inlet) and thermostat must be replaced as an assembly.
  1. Remove the radiator outlet hose. chevy_aval15_02-04_inlet.gif

  2. Remove the bolts from water pump inlet.
  3. Remove the water pump inlet from the water pump.
To Install:
  1. Install the water pump inlet to the water pump.
  2. Install the water pump inlet bolts.
    • Torque to: 11 ft-lbs. (15 Nm)
  3. Install the radiator outlet hose.
6.6L Engine To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Drain the engine coolant.
  3. Remove or disconnect the following:
    • Water outlet 6.6L Thermostat housing removal gm_trk_sil25_02-04_66_therm_hous_rem.gif

    • Bolt for the fuel line bracket
    • Thermostat housing cover bolts
    • Thermostats and seals
To Install:
6.6L Thermostats and seals gm_trk_sil25_02-04_66_therm_seal.gif

  1. Install or connect the following:
    • Thermostats and seals to the thermostat housing NOTE: The rear thermostat (D) has 2 vent valves. Install with the vent valves towards the rear of engine.
    • Thermostat housing cover with a NEW gasket
    • Thermostat housing cover bolts and tighten the bolts
      1. Torque to: 15 ft. lbs. (21 Nm)
    • Fuel line bracket bolt and tighten the bolt
      1. Torque to: 15 ft. lbs. (21 Nm)
    • Water outlet
  2. Fill the engine with coolant.
  3. Test drive the vehicle to confirm the repairs.
8.1L Engine To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    • Inlet hose from the water outlet Water outlet and thermostat removal chevy_sub25_02-04_60_thermost_rem.gif

    • Water outlet bolts (B)
    • Water outlet (A)
    • Thermostat (C)
To Install:
  1. Install or connect the following:
    • Thermostat
    • Water outlet
    • Water outlet bolts and tighten the bolts.
      1. Torque to: 22 ft-lbs (30 Nm)
    • Inlet hose to the water outlet
  2. Fill the cooling system.
  3. Test drive the vehicle to confirm the repairs.
prev.gif next.gif

Jan 12, 2011 | 2000 Chevrolet 2500

1 Answer

How to install a new fuel pump on a 1985 Chevy,305 V8,


Remove the plunger rod by removing the plate that is bolted to the block. Clean all parts if needed.

Apply some axle grease to the plunger rod and reinstall into the block, replace plate, then carefully install fuel pump, making sure the plunger is under the push rod.

Just did this same thing on my '66 283.

Dec 17, 2009 | 1985 Chevrolet Caprice

4 Answers

My 1993 chevy 1500 Silverado truck suddenly quits


I put a new fuel pump, fuel filter, and a fuel pump relay and the fuel pump is still not coming on. I am not getting any fuel. Can you please tell me what it might be.

Mar 08, 2009 | 1993 Chevrolet C1500

1 Answer

1991 chevy s10 blazer


Check the fuse under the dash. Did you replace the inline fuel filter? If not, you could loosen the line going into the filter then turn the key to the on position. The pump should run for about 2 seconds then the relay should kick off. Turn off the key for approx. 5 seconds then cycle key back on and the pump should cycle again. If you get a 2 second burst of fuel each time then the pump is cycling. Install a new fuel filter and check the grounded wire by the tank. Hope this helps. :)

Nov 03, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1993 Chevrolet Beretta Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...