Question about 2003 Hyundai Santa Fe
Car remote would not unlock, unlocked car with key, alarm went off, how do we reset, car will not start.
I had the same problem a while back. What I did was disconnect the battery for a minute and I havent had that problem since.
Posted on Feb 14, 2009
Is the battery in your remote dead? If it isn't then you may need to match the transmitter to the vehicle and to do this you have to remove the driver's side knee bolster by moving the column to the lowest position. Next remove the four lower screws, then separate the halves and remove the upper and lower steering column covers. Locate the key-less entry receiver under the instrument panel near the steering column. Slide the switch on the receiver from the off position to the set position. Now push the Lock or Unlock button on the transmitter. Now slide the switch on the receiver from set back to off.
Posted on Oct 18, 2008
Tips for a great answer:
Jan 05, 2015 | 2003 Hyundai Santa Fe
Feb 24, 2012 | 2003 Hyundai Santa Fe
Sep 05, 2011 | Hyundai Santa Fe Cars & Trucks
Feb 01, 2011 | 2004 Hyundai Santa Fe
Jan 23, 2011 | 2002 Hyundai Santa Fe
Jul 30, 2010 | 2003 Hyundai Santa Fe
Apr 22, 2010 | 2001 Hyundai Santa Fe
Feb 13, 2010 | 2003 Hyundai Santa Fe
Nov 23, 2016 | 2003 Hyundai Santa Fe
1,239 people viewed this question
Usually answered in minutes!