Question about 2007 Lincoln Continental

Open Question

How to replace 96 lincoln continental valve cover gasket?

I need to know how to replace valve cover gasket for 96 lincoln continental and put the serpentine belt back on

Posted by on

5 Suggested Answers

frankgant
  • 250 Answers

SOURCE: Diagram for 1998 lincoln continental

There should be a diagram of the route printed on the fan shroud or somewhere else under the hood of the vehicle.

Posted on Jul 09, 2008

  • 4369 Answers

SOURCE: Installing serpentine belt for 2000 Lincoln Continental

d273ea4.gif Item Part Number Description 1 10300 Generator 2 8509 Water Pump Pulley 3 8678 Belt Idler Pulley 4 6B209 Drive Belt Tensioner 5 3A674 Power Steering Pump 6 8620 Drive Belt 7 19703 A/C Compressor 8 6312 Crankshaft Pulley

Posted on May 25, 2009

  • 497 Answers

SOURCE: I need the 1994 3.8L lincoln continental serpentine belt diagram

Are you referring to the serpentine belt? That would be under the hood. Thats the black belt that is attached to the number of pulleys on the engine.

Posted on Aug 09, 2009

RJones1125
  • 373 Answers

SOURCE: 1997 lincoln Continental serpentine belt change

you need to find which pulley is the belt tensioner. use a socket and a breaker bar to lift the tensioner. once the belt loosen, slide the belt off one of the pulleys close to you. then slowly release the tensioner.

Posted on Oct 31, 2009

  • 1757 Answers

SOURCE: i need a diagram to replace serpentine belt on a

My sincere apologies for the delayed response.
I am personally going back to answer - unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.


CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1998/make/lincoln/model/continental/1998_lincoln_continental_drive_belt_routing_diagram.htm

Posted on Mar 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil on spark plugs on a lincoln continental


yes the valve cover gaskets are the most likely cause

Apr 18, 2013 | 1998 Lincoln Continental

1 Answer

Why is there oil in the cylinder bank in my 2001 lincoln continental


Theres orings in each hole you cant replace unless you take off valve covers

Nov 30, 2012 | 2001 Lincoln Continental

1 Answer

98 continental turns over will not start


the immoblizer is on lock and unlock the drivers door using the key to reset it,noe try to start..good luck

Mar 22, 2012 | 1998 Lincoln Continental

2 Answers

My 2000 Lincoln Continental has a cyclinder 8 misfire with 28% low compression. I was told this means I need a new engine. Is that correct?


depends what is causing it..... the low pressure could be head gasket is cracked damaged by that cylinder... crack in head etc.... more then likely something small not the whole engine.... could be piston, head, head gasket etc.... i wouldnt think it would be the whole engine needs to be replaced... hope this helps cheers

Mar 04, 2011 | 2000 Lincoln Continental

1 Answer

Tring to replace the valve cover gaskets and would like a little more detail instruction on part removel.


  1. starting with the RIGHTside valve cover, disconnect the crankshaft sensor connector then the a/c compressor connector and the ac cycling switch connector.
  2. release fuel preasure and disconnect lines. remove the connections for the fuel injectors and the ignition coils,remove the pcv tube and move of to the side,
  3. remove the evap purge valve and repostion the holddown clamp for it,remove the bypass tube.
  4. disconnect harness from valvecover and postion out of the way, now remove the studs,nuts and valve cover .REVERSE DIRECTIONS TO INSTALL,
  5. NOW LEFTSIDE.
  6. Remove oil sensor connector, next remove the brake booster asmbley.
  7. remove cylinder head temp sensor jumperwire connector.
  8. remove bolt and to studs for power steering resivior and braket and sit aside.
  9. disconnect camshaft sensor connector.
  10. disconnect connectors from coils and injectors,
  11. remove the wiper cowl and then the42 pin connector and 16 pin connector and trany connector.
  12. remove the 6bolts and 5 studs from valve cover and off with the cover, rev directions to install.
  13. NOTE; CLEAN VALVE COVER AND HEAD SURFACE WHERE GASKET WILL SIT, THEN APLLY THIN COAT OF SEALANT TO COVER AND PUT GASKET ON AND LET SIT FOR 5 MIN, THEN APPLY THIN COAT TO GASKET TO MATE WITH HEAD. .



HOPE THIS IS HELPFUL, GOOD LUCK AND HAVE A NICE DAY.

Nov 28, 2010 | 1998 Lincoln Continental

2 Answers

How to replace spark plugs in a 1999 lincoln continental


There are 8 plugs in the V8, 4 on each side. Over each plug is a coil that easily pulls off of each spark plug, hence 8 coils. There are two covers--one over each set of 4 coils and plugs.
The front cover has a metal tag on it that reads, "InTake 32 Valve V8". It has two 10 milometer hex screws holding it on. The back cover is the same shape as the front, but is up closer to the window. You will need just the right socket extension to get the back 4 plugs out. Good luck.

Aug 29, 2010 | 1999 Lincoln Continental

2 Answers

Oil where spark plug coil is


you have a bad valve cover gasket/ spark plug o-ring i assume the plug is set in the head with valve cover above it since there is oil in the cover gaskets and o rings are used to seal in oil remove and replace gaskets be sure to find the right torque spec for the cover bolts also remember to start with the center bolts and work your way evenly to the outside

Feb 18, 2010 | 1999 Lincoln Continental

1 Answer

I have oil leaking onto my crank sensor, can you help me know where it's coming from? my car is a 95, lincoln con


could be from the intake manifold or cam seal behind the timing cover. It's also possible
the valve cover gaskets are leaking or the front main seal is leaking. Might try cleaning engine with a good degreaser and see where the leaks originate. Good luck

Jan 30, 2010 | 1995 Lincoln Continental

Not finding what you are looking for?
2007 Lincoln Continental Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...