Question about 1994 Plymouth Voyager

2 Answers

When i put the key in the ignition, it doesn't turn. This happened to me the other day as well and a lady in the parking lot told me she had the same problem with her mini van. is this a manufacture deffect? I was wondering where i could look for help or a defective list or any kind of blog on this subject so i know what to do . Can you help me at all with this Regards Lou

Posted by on

  • roland12 Oct 11, 2008

    me too. i replaced the battery thinking it was that but still wouldn't turn over. I even jumper cabled it to prove it wasn't the new battery. When I turn the key, the starter is trying to crank but it doesn't start up. Any advice what to check/do next?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem but i realized that it was just a safety mechanism. Just turn the steering wheel and hold it while you turn the key. try it and i hope this solves your problem. good luck.

Posted on Oct 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Plymouth Master
  • 66,219 Answers

Blog for know defects on your van, I don't have a year so I can't check it for you. I will tell you that the ignition lock cylinder will have to be replaced, at some point it is going to stick and leave you stranded.

Posted on Oct 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shuts off engine the key will not come out the ignition but the accys is on


didnt specify vehicle -generic answer--check battery terminals certain gm wont release key if battery dead or connection lost ,,re try putting in park if not in park correctly same no key removal --the following links are other ways to remove key as well
How to get your key out of the ignition if it gets stuck How to Fix an Ignition Key That Doesn Turn

Nov 08, 2016 | Cars & Trucks

1 Answer

Key stuck in ignition


Hi,just food for thought,when you swich off engine and put it in park if you havent tried it already,put foot down on brake peddle and try takeing key out,if not try pressing on brake peddle and switch ignition on and off then see if key comes out.
I have to do this to my car sometimes to get key out hope it works for you.

Jan 31, 2016 | 2001 Kia Sephia

1 Answer

1991 Lexus LS 400 ignition locked doesn't turn past ACC


First things first, if you can not turn the key lock past ACC you are not doing anything with the starter. The problem with the lock must be in the lock or the linkage connected to it.
The price for the starter may be fair depending on where it is coming from.
You have to be able to turn the key to the start position before anything happens with the starter.

Sep 06, 2012 | 1991 Lexus LS 400

1 Answer

Can't turn the key in the ignition. right key, started earlier today no problem...


make sure the car is fully in park! My mother does this all the time and just barely misses putting it in park just enough so the car doesn't start

May 22, 2011 | 2000 Dodge Caravan

1 Answer

Ignition switch will not turn on. Battery is good. Steering wheel is locked, What should we do?


Quite often that will happen when vehicle parked with wheels turned, and/or vehicle on a slope, so try to avoid that in future.If nothing else, when parked on a slope, stop, keep foot on brake pedal, apply parking brake, put transmission in neutral, then take foot off brake pedal and wait for parking brake to stop vehicle rolling, then shift it into park. When leaving, put foot on brake pedal, shift to drive or reverse whatever direction your going, then release parking brake. Sounds like a lot to remember but you won't have to pull hard on shifter as before, and it could save a lot of money on transmission repairs down the road. Always try to park with wheels straight as well.
Now, with that said, if you parked with wheels turned, try hard to turn steering wheel in same direction wheels are turning, just slightly, as you try to turn key. Sometimes a quick yank in that direction will do it. Also make sure shifter is all the way in park before you try it. If your on a slope try rocking vehicle slightly up slope as you push/pull shift lever in to park and try to turn key at same time. If no luck, try pushing brake pedal real hard and try to turn key. Let me know how it goes.

Nov 06, 2010 | 1999 Dodge Caravan

1 Answer

It will not shift out of park no matter what I


Turn ignition key one click>put car in neutral>start engine>put in drive. Chances are that you've experienced ignition issues before this happened. I was told that it's not uncommon for the '95 T-bird since the ignition is ****

Jan 27, 2010 | 1995 Ford Thunderbird

1 Answer

The steering column did not lock, the car is in


1. Make sure the car is fully in PARK.

2. Put the key into the ignition and turn the wheel each way while trying to turn the key.

This can happen when there is pressure on the wheels, like when you park with your tires turned to one side.

Sep 13, 2009 | 2003 Chevrolet Impala

1 Answer

Unable to remove key from ignition


On another web site a lady said she carried a small rigid wire and inserted it in a small hole around ignition to release key

Jul 02, 2009 | 2002 Pontiac Grand Am

1 Answer

Ignition is locked


The wheel may be locked. Steer with a bit of pressure to either side then try to turn the key - this can easily happens if you park on a slope without parking brake applied. Another thing you may want to try is to shift out of Park then back to it or put it in Neutral. Good luck!

Mar 21, 2009 | 2003 Nissan Altima

Not finding what you are looking for?
1994 Plymouth Voyager Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...