Question about 1992 Oldsmobile Ninety Eight

2 Answers

1992 Oldsmobile Ninety Eight Wire Schematic

The horn does not work, the relay is clicking when I push the horn button, but there is only .4 volts at the horn. I need to pass inspection to get a sticker.

Posted by on


2 Answers

Cut back the positive wire enough to check the voltage on good wire , not just at the plug. if you still have bad voltage check the ground to see if you are getting decent continuity! if all is still no good replace the wire from the fuse block to the horn. this is not as scary as it sounds and then you'll be back on the road good luck

Posted on Oct 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

If relay is clicking but not transfering power then it is a bad relay.try pulling relay out and putting back in might be bad connection

Posted on Oct 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1992 Oldsmobile Ninety-Eight.

Given the car is 22 years old I will only guess

That is what we do here

I would say maybe the switch for the high beams is worn out

I guess that is on the steering column on the left side?

Mar 22, 2014 | 1992 Oldsmobile Ninety Eight Regency

1 Answer

Wiring diagram for 1992 oldsmobile 98 regency elite

I have a 1992 /98 0lds the air condition will not work unless I take the ground wire lose then it kicks in but it show that makes car is over heating when it is not what sencer is doing this please help it is hot in texas

Jun 10, 2012 | 1992 Oldsmobile Ninety Eight Regency

1 Answer

Where is my horn relay located in my 92 olds cutlas cruiser ?

have you checked the fuse for the horn you don`t say what you have done to this point,if the fuse is good and you hear a click when you push on the horn button, then the horn relay is good as that is what is clicking,if not you will have to check the horn itself as some relays won`t work if the horn not itself is not working,by running a jumper wire from the battery positive to the terminal on the horn, it should work if not then the horn is the problem.the relay is on the fuse panel under the dash.I think it is a square sided relay

Mar 10, 2011 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Were is the starter relay on a 1992 Oldsmobile 98?

You should find the starter relay on the passenger side firewall near were the heater hose enters the firewall.

If you have any further questions let me know


Jul 07, 2010 | 1992 Oldsmobile Ninety Eight Regency

1 Answer

Oil Pressure sending problem - 91

Have you replaced the oil pressure sending unit?

May 15, 2010 | 1992 Oldsmobile Ninety Eight Regency

1 Answer

1992 oldsmobile ninety eight

Check egr valve, check pvc valve, check head gasket, check air filter, timing timing out of adjustment, burned valves or leaking, cam shafts could be worn, check fuel enjectors.

Jun 30, 2009 | 1992 Oldsmobile Ninety Eight

3 Answers

No horn

You have to test the wiring between the relay and the horn. First make sure that you have 12 volts at the relay terminal that feeds the horn, then make sure that the wire on the horn is getting the 12 volts when you push the button. Finally make sure the ground is good where the horn is mounted. If the ground is bad, run a ground wire from the engine block or battery to the point where the horn is mounted.

If all wiring is good, then you need a new horn

May 31, 2009 | 1990 Buick Riviera

1 Answer

1982 olds wont start i can jump it across the selinoid and it starts but when i remove jumper wire it dies

have you replaced the selinoid? It sounds like the 12 volts is not staying constant to the other side without the wire

Mar 05, 2009 | 1992 Oldsmobile Ninety Eight Regency

Not finding what you are looking for?
1992 Oldsmobile Ninety Eight Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides