Question about 2004 Nissan XTerra

2 Answers

How to remove tail lamp for nissan xterra 2007 ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Once you remove the bolts, you have to pull it straight back, but it takes a lot of force sometimes.

Posted on Aug 06, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Open the back hatch and there are two screws. Take them out and you will have the lamp off.

Posted on Jul 25, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuse removal for 2007 xterra

What is the question?

Why remove them?

Aug 03, 2014 | 2007 Nissan Xterra Off Road

1 Answer

How to install a tail light on a 2007 GMC Sierra

lower the tail gate and remove 2 screws at the top and bottom of the lamp that you swant to remove then pull lamp towards the rear of the vech.
The lamp should come out.

Feb 20, 2010 | GMC Sierra 1500 Cars & Trucks

1 Answer

How do I pop the tail light off on a 2002 Nissan Xterra to change the bulb?

remove the two visble 10 mm screws.

Do not use any tools trying to pry the assembly out.

Just use your hands and you will not break anything.

Using your two hands, pull towards you firmly shaking the assembly and it will come out.

Jan 13, 2010 | 2002 Nissan Xterra

1 Answer

Remeove rear combination tail light cover 2006 Nissan XTERRA

thode screws hold the lens or the light assembly? Allow for the whole tail light to come out and the bulb plug will be accessible. I never had the privilage. But how the lens fits will tell you. If the lens goes overthe edges, the whole unit comes out, lens is sealed. Good luck

Jun 03, 2009 | 2006 Nissan Xterra

1 Answer

Loose drivers side fog lamp on 2003 Xterra

if you look up from under the front bumper there should be some screws surrounding the lamp that's the adjustment

Apr 26, 2009 | 2003 Nissan Xterra

2 Answers

Remeove rear combination tail light cover 2006 Nissan XTERRA

I just changed out a tailight on my 2000 Nissan Xterra, so I assume it may be similar. You have to pop the plastic strip which runs across the back. There are pop rivits in it.

Jan 01, 2009 | 2006 Nissan Xterra

2 Answers

Replace tail light

Rubber seal has adhered to body. Hit the llamp with side of you fist to dislodge,

Jul 19, 2008 | 2004 Nissan XTerra

1 Answer

Brake light replacement

There are 2 screws on the hatch side, remove them and on the "outside" or body side of the lamp there are 2 studs on the back of the lamp that push into female clips in the body, so you should just be able to gently pry the lense assembly out. I use two screwdrivers. They snap loudly when they come out and also snap loudly when you are putting it back on. Make sure you push hard enough to hear the snap.

Jul 07, 2008 | 2007 Nissan Xterra Off Road

Not finding what you are looking for?
2004 Nissan XTerra Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

63990 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides