Question about 1989 Oldsmobile Cutlass Ciera

2 Answers

Serpentine belt diagram for 1989 olds cutlass ciera. 2.5 engine-4 cyc. has a/c

Posted by on

  • 1 more comment 
  • Anonymous Oct 30, 2008

    vhjk

  • Dewayne May
    Dewayne May Feb 05, 2009

    i need a belt route for a a1989 oldsmobile ciera the belt broke abd dont know how it goes back on

  • yadayada
    yadayada May 11, 2010

    Have you looked under the hood?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

89 olds cutlas ceria, 2.5 cyl with ac...... start at crank pulley rib side around p/s pulley to alt pulley flat side on the left side of water pump then rib side around ac pulley flat side around tension pulley back to crank

Posted on Apr 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you show me a diagram of which spark plug wire goes to what spark plug on a 89 oldsmobile ciera please.


Standing in front of the car looking at the the coil packs, there are three of them. From left to right, the first coil pack is 1 & 4, the second coil pack is 6 & 3, and the third coil pack is 2 & 5. Now standing in front of the engine, the three cylinders in front of the radiator are 2,4 & 6 starting from the belt side of engine and the ones in the back off engine are 1,3 & 5.

Jun 05, 2011 | 1989 Oldsmobile Cutlass Ciera

1 Answer

Engine Swap


NO IT WILL NOT DROP IN, THE OLDS NEVER USED THE 3.8 LITER POWERPLANT

Apr 30, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

How to change serpentine belt on 1993 Olds Cutlass Ciera V6 motor


Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC...etc).

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1993/make/oldsmobile/model/cutlass_ciera/1993_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Mar 22, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Need a diagram of how a serptine belt is installed on a 1990 olds cutlass ciera 2.5 lieter motor


Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 1990 Oldsmobile Ciera, depending on your size 2.5L Engine options (AC/No AC, etc.).

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/1990/make/oldsmobile/model/cutlass_ciera/1990_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Feb 20, 2010 | 1990 Oldsmobile Cutlass Ciera

2 Answers

I need the serpentine belt routing diagram for a 1993 cutlass ciera V6 3.3


Call any good parts store and they have pictures in the front of their belt catalogs that show the routing diagrams of each car.

Sep 10, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

How to replace serpentine belt diagram 1997 olds cutlass


Have you checked under the hood, should be a belt diagram some were around the fan shroud .

Sep 07, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Pully on air compressor broke.


Yes, It will Work. Just make sure that the Place where you get the Belt will allow you to Return the Belt if it will not Fit. Sometimes you may need a Shorter or Longer Belt. Please Rate My Response! Thanks!

Feb 02, 2009 | 1989 Oldsmobile Cutlass Ciera

1 Answer

Serpentine belt diagram


There should be a factory diagram at the front of the radiator top plate near the passenger side. That's where it is on mine, and it shows with and without AC. I hope that helps

Oct 22, 2008 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

1,250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...