Question about 1984 Chrysler E-Class

1 Answer

Brake light problem

The passenger side brake light goes off when the headlights switch is pulled to turn the headlights on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 178 Answers

Hello i would check the headlight switch most likely the internal contacts in the switch is most likely worn when you turn your lights on internaly the tabs cross to make the contacts to light your lights parkinglights one position,running lights another position i would change the switch goodluck please rate

Posted on Oct 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I disengage the daytime running lights and still have the ability to have the headlights on at night.


The light switch can over ride the DRL. If it doesn't. You have 3 possibilities. The switch s bad, the light sensor is bad, or the BCM is bad or not receiving signals. Have the codes read for the BCM.. Takes a scanner. Not a code reader.

May 01, 2016 | 2002 Chevrolet Tracker

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

2 Answers

Brake light trouble right side brake light will not come on but both flashers work also turn signals work older ford truck what could the problem


I have to think the problem is inside the turn signal switch, a poor internal connection. You know the brake signal first goes through the turn switch before it goes to the bulbs. That is why the brake lights and rear turn signal lights share the same filament in the bulb, and the same wire going to those lights. The only difference is the turning side light is affected by the turn signal flasher, causing blinking, while the other side- the non turning side-does not go through the flasher relay, but straight to the bulb from the turn signal switch. Change your turn signal switch and I believe you will solve the problem. Let me know, okay?

Sep 16, 2015 | Ford Cars & Trucks

1 Answer

Brake lights don't work, dash lights come on when brakes are applied and cruise goes off when headlights are turned on


brake lights operate off a simple switch mounted to the bracket of the brake peddle. that switch can easily have a wire pulled out, the switch it self dies from use. a fuse in the fuse box in the lower part of the could be blow. as far as the cruise going off when headlights are turned on, could be the switch on the column itself is worn out. remember your girl is a teenager now, they give you the most random problems. (girl being the truck)

Oct 05, 2013 | 1996 Toyota Tacoma

1 Answer

Weird tail light problem


HI Matt,
Your issue sounds like a fault, most likely in the rear lights. Current is feeding from the brake light circuit, into the running light circuit. The most common causes are a bulb filament broken and touching the running light circuit, and loss of ground.
observe the rear lights closely and you should get a clue as to which light is failing....but if not, just pick one....
I would run a temporary ground and test again, if no results, pull the brake light bulbs...
Transient current is often difficult to wrap your mind around, until you understand what can happen.
Doc

Mar 08, 2012 | 2006 Jeep Grand Cherokee

1 Answer

Driver side blinker goes double time when headlights are on and all the bulbs in the rear flash at a different time. When the brake pedal is pressed driver side brake light goes out and both reverse l


You have a broken Ground wire From Body to Frame . You Should Have a Heavy Braided Ground wire From Engine Block to Frame on Pass side, Then You will have another one that goes from firewall to engine , like at the back of the Head on passenger side to a screw to firewall.,....One of these is Broken,Loose, Corroded.

Feb 29, 2012 | 1998 Chevrolet K2500

1 Answer

Headlight come on , replace dimmer bulb but light comes on and goes back out. could it be relay or switch itself. The light and fog light work on driver side but not passenger side. IThis problem occur...


it sounds as though there is a loose connection on the passenger side. Check socket and switch bulbs from driver and passenger side. hope this helps tim

Sep 05, 2010 | 2001 Hyundai XG300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...