Question about 2000 Oldsmobile Intrigue

2 Answers

Long crank time for 2000 olds intrigue 3.5

Most time longer than normal cranking for motot to fire uo

Posted by on

  • Anonymous Dec 21, 2008

    CPsensor replaced to day and when went to turn into driveway care died, everything...lights, inside out ...etc turned off and turned key back on...started..sometimes takes 10-15 minutes to start Have new battery about 3 weeks ago thought may have been the problem, apparently not...help???

×

2 Answers

I've seen a lot of problems like this that is caused by the crankshaft posistion sensor which is located behind the starter. I would check that.

Nic

Posted on Oct 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

First thing i would do is replace your fuel filter.
with a fuel filter restriction it take longer to provide enough fuel pressure to fire.
that would be the most common but there are also may other things that could have happened but would need more information to do a process of elimination
good luck
paul

Posted on Oct 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 olds intrigue i just got in my car and every time i crank it loses power then the dials go crazy and for a minute or two then the power comes back on.


usually dials going crazy indicates low battery and/or failing alternator. Make sure they are 100 working before making a lot of other fixes.

Feb 17, 2015 | 2000 Oldsmobile Intrigue

1 Answer

No start after new cylinder heads and timing belt


Recheck your timing you might have it 180 out

Apr 26, 2014 | 2001 Mitsubishi Montero

1 Answer

Exsseved cranking to start motor 2-3 seconds then starts


Crank sensor is going out, I have a 2000 Intrigue and that is classic symptoms, it will eventually not start. Not that difficult to change.

Dec 28, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Starter wont crank on a 2000 oldsmobile intrigue


Check your manual if you have it. I believe you need to have the key in the ignition in the ON position for about 10 minutes to reset the security system.

Jul 08, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Car wont start but battery is good


"assuming" the engine is cranking normally then you need to identify what is missing

is the fuel pump running
do you have fuel to the injectors
do you have injector pulse

do you have spark

is the security module disabling the engine?

and finally what is the crank/cam timing
however, IF the vehicle is cranking normally then this should not be the cause


Jun 25, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Where is the crankshaft position sensor located on a 2000 intrigu


Should be located around 11:00 on front of engine at crank pully.

Oct 28, 2009 | 2000 Oldsmobile Intrigue

2 Answers

I have a 2000 olds intrigue. It stahls out while


unplug the torque converter clutch it will run fine without it and should cure your concerns

Aug 20, 2009 | 1990 Chevrolet Lumina

1 Answer

Car was running fine, now won't crank. It turns over. Some told me timing chain, distributor, injectors, spray carb spray in throttle body or something like that. Can you please help me?


You are saying that the engine will crank or turn over but will not start? If so then you must fine out if the engine has both fuel and spark. after that you can get into the right direction. You can use starting fluid to see is there is a fuel issue. Read the directions on the can. Using too much can harm you and/or your engine.

May 21, 2009 | 1999 Oldsmobile Intrigue

1 Answer

NTERMITTENT STALLING AND STARTING.


A very common for these problems is a leaking fuel pressure regulator. This leaks gas and causes extended crank times, stalling, and check engine light.


TechJK
---------

Jan 05, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Crank position sensor location


you will need to remove the starter to gain acess to the ckp sensor. once you remove the starter look on the engine block and you will see the sensor. The only problem with doing this repair yourself is that you will not be able to preform the crankshaft position variation learn procedure with out a factory scan tool. The vehicle may crank an run, but the timing advance curves will be wrong so the vehicle will probably cut off every time you remove your foot from the gas pedal. Hope this info helps!

Aug 18, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...