Question about Ford Windstar

1 Answer

Have problem with 2003 ford winstar, single light and marker light no power to it but all other lights work good, why just one side fail need to no thankyou

Posted by on

  • dezie97 Apr 07, 2009

    sorry checked all that and still no power,, have u ever herd of a sencer for each light under the dash some were thats what the ford dealer told me. it would cost lots to get it looked at lol,, the hole dash has to come out they say but i cant figer that but them u never know about fords..

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Trouble in main wire harness ..bad ground ...water in fixture... bad bulb socket... could beany of these solutions

Posted on Oct 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford F-150 4X4 side marker lights not working. is there a seperate fuse for them?


The marker lamps are on with the parking lamps ( the low wattage element in the tail lamps ). If you are missing a single parking lamp, chances are the bulb is burnt out.

Apr 13, 2011 | 2004 Ford F150

2 Answers

I have a 2003 GMC Envoy XL and the driver's side front parking and marker lights don't work although the signal light does. Both of the marker lights were blown and one of the prones in the parking lamp...


If you have a test light, you can check for power at the light sockets and connectors. If you have power, you can connect the alligator clip on the test light to the positive side of the battery and test for a faulty ground...Good luck!

Mar 14, 2011 | GMC Envoy XL Cars & Trucks

1 Answer

The tail lights and rear side marker lights on my 94 XJ6 fail intermittently, more off than on lately. Is there a single relay that controls that whole back end array? RH and LH fuses OK, bulbs OK. Rear...


Well i have the same car and mine doesnt have the side lights on the side of the car so these must be add on lights that have been fitted by a previous owner ,i have another identical car in the yard for spare parts and this isnt fitted with them either .So i would assume that these side marker lights are not original fitting and therefore they are wired into the loom somewhere but i couldnt tell yuo as only the person that fitted them would know .You will have to follow the wires from these lights back to where they join the loom and i wouldnt be surprised if the connection hadnt corroded causing the lights to fail ,now to fully understand the problem i would need to have a play with the vehicle but i do have the workshop manual with the wiring diagrams but their are more than model listed as you havent stated what size engine this is or weither its a manual or auto version as they do differ,anyway their is a control module for all four lights and a bulf failure warning module as well so sorting this fault out could be more difficult that first thought and if all else fails the run the feed for the rear lights direct but before you go any further make sure the rear lights have a good earth point as this could cause all sorts of problems and stop lights would earth back through indicators or tail lights causing a very similar problem to what you describe.I have scanned my manual and picked a wiring diagram at will but basiclly they will be the same except for the firing controls .alicantecoli_11.tifalicantecoli_12.tifalicantecoli_13.tifalicantecoli_14.tifi have uploaded the wiring diagram in A4 pieces but they have to be censored first so they may take a while to come through .

Jan 25, 2011 | 1994 Jaguar XJ6

3 Answers

2003 ford focus zx3 How to replace rt front marker bulb ???


the inner fender will provide a way. I would simply take it to a store and ask them nicely if they will do the install - -many times they will do it and at no charge. - if you must - -carefully pull away the inner fender from under the car - and look for the back of the marker -

DO NOT PRY on the plastic or you will break it and still not be able to change out the bulb.

Mar 11, 2010 | 2003 Ford Focus

1 Answer

When i hook my trailor's lights to my 2003 yukon xl, park lights doesnt work, but all other lights work


You mean the truck parking lights dont work, or the trailer running lights dont work? Does the trailer just have tail lights or does it have front and rear side markers? I think you mean the trailer lights. Check for power at the plug,(Brown Wire) if there is power, then you could have wiring problems, but a better description of what works and what doesnt work needs defining.

Dec 18, 2009 | 2003 GMC Yukon XL

2 Answers

Rear marker lights are out but brake lights work


marker lights and brake lights usually are separated -- they use a two filament bulb -- check bulb first -- sometimes the connections get dirty -- use electrical contact cleaner and spray the connections -- if that doesnt work -- there is a short in the wiring

Mar 14, 2009 | 1997 Ford Escort

1 Answer

2003 winstar van radio stopped working clock, no lighting on the panel, all fuses are good


This would be a good indicator that your display screen is burnt out. This means there is nothing that can be done with it unless you replace the whole stereo unit.

Jan 31, 2009 | 2000 Ford Windstar

1 Answer

Marker and single light on passenger side front


check the wiring has it been in a accident/ chesck fuses in the engine compartment and under the dash/ Please rate my response thak you very much

Jan 27, 2009 | 2003 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...