Question about 1997 GMC Jimmy

1 Answer

1999 GMC JIMMY 4X4

Four wheel drive will not disengage

Posted by on

  • 1 more comment 
  • Anonymous Feb 14, 2009

    well not dis engage

  • Anonymous Feb 26, 2009

    4 wheel drive was stuck in 4hi for 2 days then wasnt in anything? No lights were on now when in drive it sounds like nutural?

  • Anonymous Apr 02, 2009

    I have the same problem. Not sure what causes it. If you put the vehicle in reverse it should disengage.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2000 jeep classic 4 wheel is not disengaging and has a smell when in 4 wheel

Posted on May 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Select 2wd,4wd dash light is still illuminated,does this mean it is still in 4wd,if so what am I to look for ?


On four wheel drives turning is a real indication when four wheel is still on...4wheel is a bit more sluggish on turns. But, im a bit old school and am thinking trucks since nothing is listed. Most electric transfer cases have an actuator than engages an disengages electronically, but sometimes they get sticky and require a love tap or driving in reverse to disengage the actuator... you could also suspend the vehicle in the air and engage an disengage a see what is happening too.

Feb 20, 2016 | Cars & Trucks

1 Answer

Can 4 wheel & differential be used together


If you have four wheel drive engaged, engine power is routed through the transmission to the transfer case to the front and rear differentials. When four wheel drive is disengaged power goes only to the rear differential.

Mar 15, 2015 | Cars & Trucks

1 Answer

2003 Kia Sorento 4 wheel drive will not disengage


Best way to fix it is to lift one side of the car using a jack. Get front and back wheels off the ground. Then put the car into neutral and out of four wheel drive into 2 wheel high ratio. Start the car and rev it up to about 3000rpm for a short while. It should then release the four wheel drive.
It gets stuck mainly because of transmission wind up. Ie tension in the transmission.

Mar 01, 2014 | 2003 Kia Sorento

1 Answer

Front wheels will not disengage EVER when I use four wheel drives


This happens on these two to four wheel drive units, you need to get it to a garage that knows how to unlock or disengage the four wheel drive , doing this on your own will cause more damage.

Dec 28, 2013 | Cars & Trucks

1 Answer

I can't Desactived the four wheel drive where is the switch for the four wheel drive, is a GMC YUKON DENALI 2007


{: ) If your vehicle has an AWD (All-Wheel Drive) feature, engine power is sent to all 4 wheels all the time. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle. It is fully automatic, and adjusts ityself as needed for road conditions.

Jan 07, 2011 | 2007 GMC Yukon Denali

1 Answer

I have a 2002 Liberty 4x4 and today when I tried to put it in four wheel I drove forward afterwards, but if you try to turn the car acts like it will not go at all.


That is normal for four wheel drive vehicles on hard non slip ground.The front wheels when four wheel drive is engaged will act like a brake if they are turned almost all the way to the left or right.When the two wheel drive is disengaged it will drive normally again.

Dec 22, 2009 | 2003 Jeep Liberty

1 Answer

1997 Jeep Grand Cherokee wont come out of four wheel drive unles it sits over night, what can I do?


With any four wheel drive you should always stop and back up ten feet when ever taking it out four wheel drive. This helps to unlock the gears so they can disengage and helps ensure that it isn't still in 4WD.

Dec 03, 2009 | 1997 Jeep Grand Cherokee

1 Answer

4 wheel drive will not disengage


Once you turn off four wheel drive back truck up at least 20 feet. This should disengage.

Mar 22, 2009 | 1999 Ford Ranger SuperCab

3 Answers

Jeep stuck in low four wheel drive


Put the transmission in neutral, emergency brake off, foot off the brake pedal, now try shifting out of 4 wheel drive low. If that doesn't work, drive forward, and again do the above, trans. in neutral, roll to a stop, foot off brake, try to disengage. What you're probably experiencing is called drive shaft 'wind up', and it is very difficult to disengage, but do the above and it should shift out of 4 low. countrycurt0

Sep 01, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
1997 GMC Jimmy Logo

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...