Question about 2000 Jaguar S-Type

1 Answer

Heater problem Air conditioning works. Heater doesn't. I don't think the water is flowing thru the heater core. Is there a faulty valve that may be the cause?

Posted by on

  • eyredavies Oct 08, 2008

    heater blowing cold air.problem starterd when expansion bottle starterd leaking.fitted brand new expansion bottle, still blowing cold air.,any ideas

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

We have replaced the heater tap which is located just behind the radiator. It has a number of hoses attached to it as well as the switch. It is a %$#@*& to get at and you will need to remove all the front shrouds as well as the radiator to do it successfully. Problem solved but if you can do it yourself you will save yourself a monster labour bill to repace a reasonably easy fitting.

Posted on Oct 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 ford ranger no heat have changed thermostat water pump heater control valve


Maybe the heater core is plugged or you haven't bled it properly?
If the heater hose returning from the core to the water pump is NOT hot, while the hose going to the heater core from the thermostat area IS hot, then the heater core is plugged probably.
You need to remove the heater hose while cool,from the thermostat area and remove the hose from the water pump area (that's the outlet of the flow thru heater core) AND THEN take a garden hose with p-is-tol grip type sprayer,and blow water back thru the outlet hose out the inlet hose. This will blow any bad plugging material out the way it got in.
Don't apply too much pressure if it is plugged bad. The heater core isn't made to stand 50lbs. water pressure. don-ohio (:^)

Dec 31, 2016 | 1998 Ford Ranger

1 Answer

2000 oldsmobile bravada heater control valve location


If you are looking for some sort of water valve that diverts water to/from the heater core, forget it. They don't exist anymore. They went away shortly after the widely adapted use of air conditioning in today's modern cars. Now, hot coolant is routed thru the heater core at all times, but is controlled by a cable-operated, or vacuum operated "blend door" located inside the heater box. If you are not getting heat to the vehicle, there are a few possible problems:

1. Bad thermostat - thus low coolant temperature and lack of heat.
2. Clogged heater core - no water flow thru core, thus no heat.
3. Broken control head - loss of cable or vacuum actuation of blend door.
4. Broken heater box/vacuum tank - no actuation of blend door.

Of the items listed above, based on the age of the vehicle and the likelihood of occurrence, I would investigate them in the order of 2, 4, 1, 3.

Jan 20, 2016 | 2000 Oldsmobile Bravada

2 Answers

2002 Ford Taurus, Heater blows cold air?


What have you checked so far ?
Radiator full of coolant ? Heater hoses getting hot ?

Feb 23, 2015 | 2002 Ford Taurus

1 Answer

Truck will only heat for a minute then quits


make sure hot water is flowing thru the heater core by feeling both hoses, in and out, both should be hot. if not, maybe the valve is not opening to allow the water to flow. If both hoses are hot then maybe the heater valves are not working and you are just bringing in cold outside air instead of the air flowing thru the heater core and providing heater air. Could also be a sensor in the heater that thinks it is a lot warmer than it really is.

Feb 17, 2015 | Cars & Trucks

2 Answers

2005 gmc savanna van...cooling system will not blow hot heat. water pump,heater core,radaitor and thrmostate replaced. is there any electrical problems/


don't know this van specifically, but some things to check, make sure cabin filter is replaced or clean, you didn't say if the blower itself works, if not, correct or replace. Check the hoses going to the heater core, if hot water is flowing thru the core, both hoses should be hot. Check the heater controls to make sure doors in the system are opening closing as they should, you may just be drawing in cold air and not going thru the heater core.

Feb 11, 2015 | 2005 GMC Savana

1 Answer

1999 Jeep wragler heater blowing cold air why?


Could be different problems.
The blower uses a resistor to regulate fan speed, the resistor could be faulty.
You would need to know if the radiator is full of coolant and if both heater hoses are getting hot. There may be a temp control valve in one heater hose that is not opening up to allow flow thru the heater core.

Jan 24, 2013 | 1999 Jeep Wrangler

1 Answer

99 ford mustang 6 cylinder. Recently i had to add antifreeze to my car couldn't find the radiator drain to take some of the water out so i loosened the lower coolant hose to drain some out after...


replace any soft hoses.
collapsed hoses cause water flow constriction
.that increases temp fast

to bleed air out of the system . if no air bleeder as such
with heater on full .-engine running
loosen the bypass pipe for the closed thermostat till only coolant flows no air bubbles
check if
the engine cooling fan spinning fast enough
the water pump in good condition
the interior directional flaps motors or actuators working

Apr 01, 2017 | 1999 Ford Mustang Cobra

2 Answers

1998 Jeep Wrangler. When I try to use heater, plenty of air comes out of vents, but not hot air...A radiator specialist said there was no problem with the heater core. What could this be?


THERMOSTAT STUCK OPEN OR HEATER.TEMPERATURE CONTROL MODE SWITCH NOT GETTING VACUUM OR THERE IS A ELECTRICAL PROBLEM IN MODE SWITCH.

Sep 14, 2011 | 1998 Jeep Wrangler

1 Answer

Heater does not work have flushed engine changed thermostat and heat flapper valve


the problem maybe heater core stopped-up. need to see if coolant is flowing thru heater core.and check to see if heater hoses are getting hot near heater core . if take off heater hoses to core with water hose run water thru one side of the hoses to see if water flows thru the other hose.

Nov 19, 2010 | 1998 Ford Econoline

1 Answer

No hot air from heater, fan works, air conditioner works


Check and see that there is heat in both heater hoses going to and from your heater.It is shows that you are getting a flow through the heater core.
If the hoses are not both hwarm then you may have restricted flow either in the hoses, the control valves or in the core.
I they are both warm then check the following.
I had a cold car that the hoses were reversed on and the hot water was going into the top of the heater core. I solved the problem by reversing the heater hoses to have the hot water going into the core on the botton and returning to the motor thru the top line.
Good Luck

Aug 10, 2008 | 1985 Ford F150

Not finding what you are looking for?
2000 Jaguar S-Type Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

447 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...