Question about 1993 Isuzu Rodeo

1 Answer

Turn signals/ flasher don't work

My turn signals and flashers do not work ( on my 1993 rodeo). fuses and all are good. there is a buzzing noise from under the dash on the left wall were some switches or relays are located. there are 3 different plugs that go into this particular relay. what is the name of this relay switch if that is my problem.

Posted by on

  • mminsl84 Mar 24, 2009

    Both front turn signals don't work. The bulbs are good and come on but no flash. Is there a relay switch to fix this problem and if so, where is it located?

  • mminsl84 May 11, 2010

    Where is the switch located?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

It's called a flasher relay and is either round and silver or black and square, you can pick it up for a couple of bucks at your local auto parts store. please rate this thanks

Posted on Sep 30, 2008

  • Ronald Mueller
    Ronald Mueller Sep 30, 2008

    sir please change the rating i gave you the correct term and answered you correctly this is an insult

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the flasher relay on a 2004 rodeo


Under the steering column near the OBD2 connector(it has a lot of pin slots in it. Hope this helps. Please enter helpful in comments.25372419-gnh145xtoap0303zk4oai0dz-1-1.jpg

Jan 17, 2015 | Cars & Trucks

1 Answer

Hazard flasher on 1993 mazda mx6


IT IS LOCATED AT--BEHIND LEFT SIDE OF DASH IN RELAY BOX. (TURN SIGNAL AND HAZART FLASHER UNIT ) SAME FOR BOTH. PUT YOUR TURN SIGNAL ON AND TOUCH THE RELAYS IN THAT AREA YOUR ARE GOING TO FEEL WICH ONE IS WORKING, (DEFECTIVE FLASHER OR HAZARD SWITCH. )

Oct 12, 2017 | 1993 Mazda MX-6

1 Answer

The brake lights work but the turn signals don't!! Have checked the fuses and bulbs, but not finding the problem


Fuses and bulbs OK, but wires? Additionally I suggest keep in mind that turn signals work with FLASHER devices (two independent) on 1993 Buick Skylark..

Application: Turn signal
Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted on support bracket

Application: Hazard flasher
Flasher is located: Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel

Hope this helps (remember to rate and comment this answer).

May 14, 2011 | 1993 Buick Skylark

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Haz flashers wont work but blinkers do


There are 2 seperate flashers 1 for turn signals and 1 for hazard.The hazard flasher is located in the convenance center the turn flasher in the fuse box. Also seperate fuse's for each. One battery circuit for hazard Ignition for turn signals.Check fuse for hazard,if good try swapping in the turn signal flasher and see if hazards work.They use the same flasher unit.

Aug 20, 2009 | 1993 GMC Safari

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

2 Answers

97 honda accord turn signal problem


Flasher unit is bad. Replace flasher

Dec 28, 2008 | 1997 Honda Accord

2 Answers

No flashers or turn signals


Try the fuse/breaker panel under hood, drivers side.

Jun 20, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
1993 Isuzu Rodeo Logo

661 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14406 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...