Question about 1996 Dodge Dakota

Open Question

I need a vacuum line diagram for 96 dodge dakota 318 engine

I installed a 318 engine in a 96 dodge dakota and need help putting the vacuum lines back on correctly. I just need the diagram. Thanks!

Posted by on

6 Suggested Answers

chiquititas
  • 1010 Answers

SOURCE: Vacuum diagram for 4A-F engine

hmmmm... im not expert in these kind of problem but... try to replace the diagram? it is possible?

Posted on Jun 19, 2008

  • 1 Answer

SOURCE: diagram of vacuum lines

59a5fb6.jpg
I think this is what you are looking for.

Posted on Mar 28, 2009

  • 153 Answers

SOURCE: how to replace water pump on 1995 dodge dakato 5.2 liter V8

When I do those I find it's easier to get some of the stuff out of the way. Fan shroud, Alternator, AC compressor(don't remove AC hoses just swing it over to the side) and the AC/alternator mount bracket. If you don't have the special hose clamp plyers they are worth buying. (those clamps are difficult with regular plyers) The fan clutch has a special wrench which is thinner. When you start the job break loose the fan clutch before you remove the belt. It keeps tension on the pulley. The nut is normal threading and usually comes loose with a sharp rap of the hammer on the fan clutch wrench.
Here is an illustration of the water pump bolts. I hope this helps you out. let me know how it goes.6f7219e.gif

Posted on Apr 05, 2009

michigan man
  • 3533 Answers

SOURCE: '96 C280 vacuum lines diagram or answers

i do not know but give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man. you can also stop by you local dealership in the parts department and they will print off a diagram for you too.

Posted on Oct 22, 2009

bsylvi321
  • 46 Answers

SOURCE: i need a vacuum line diagram

Use a industrial vacume tester, check each port coming off of the manifold, run your lines.

Posted on Apr 21, 2010

c17hydro
  • 2984 Answers

SOURCE: 1989 dodge dakota v6 vacuum diagram.

try this out:

http://www.chiltonlibrary.com/content/images/8847/images/88474v02.pdf

Posted on Apr 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a vacuum line diagram of 96 dodge cummins for the 4x4 and all. please help thanks


I am sorry but we do not have this diagram. Check with this website. There is a small fee.

Oct 08, 2012 | Cars & Trucks

1 Answer

Where is vacuum hose for cruise control 95 dodge dakota


On the 95 5.2 318 SLT it comes off the passenger side of the intake manifold around middle ways under the center section bellow the throttle body.From there the vacuum line goes through a one-way "in-line"directional valve.The valve has the black side to the vacuum port of the manifold. It there goes to a "T" fitting.One hose on the "T" goes to the driver side through the firewall to regulate air flow in the cab.The other side of the "T" goes to the air ball next to the cruise control servo on the firewall. This hollow ball stores 10" of vacuum to operate the vacuum diaphragm of the cruise control servo. Hopes this helps. Jimmy

Feb 20, 2012 | 1995 Dodge Dakota

1 Answer

Problems with vacuum on my 96 Dodge dakota V6


Hi Tnmcat,
Check the available vacuum at a manifold port with the engine idling. It should be 17-21 inches of vacuum. If it is to low,it will give you multiple vacuum concerns. Also, I don't think this unit had a vacuum advance. This timing and advance should be controlled by the on board computer (or PCM). If you turn the distributor it will not change the timing but it will throw the fuel system out of synchronization. Here is the vacuum diagram I have. If you need anything else,drop me a line. Thanks,Chuck

cce6c88.gif

Jul 29, 2010 | 1996 Dodge Dakota

1 Answer

Where is the 1993 dodge dakota low side ac valve location, 318 v8......


Hello chopspage
I will assume that the a/c system has been changed over from R-12 to
R-134, if not, it needs to be done before going any further.
That said the low side service port is located on the compressor head or
on the suction line from the comp. head. With the R-134 system installed correctly the charge line will only fit the low side as the hi side
has a larger fitting. Hope this helps.

Jul 10, 2010 | 1993 Dodge Dakota

2 Answers

1996 dakota 2wd with 318 engine. i drive it every day, however, sometimes it stalls when coming to a stop, runs kinda rough (missing?) when accelerating. If i floor it, it runs GREAT. what could this be?...


it could be fuel or you could have a vacuum leak. check your fuel pressure regulator on your fuel rail and see if you have the right amount of pressure also check your map sensor the vacuum line tends to crack

Jan 18, 2010 | 1996 Dodge Dakota

1 Answer

Vacuum lines


look under the hood on the radiator support there should be a belt routing diagram and next to or near that is the vaccum lines diagram

May 10, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

How to set a timing chain on a 1992 dodge dakota 318


Usually there is a dot on the crank gear and one on the cam gear. Crank is up and cam is down but you still need to make sure you have TDC=top dead center

Mar 16, 2009 | 1992 Dodge Dakota

Not finding what you are looking for?
1996 Dodge Dakota Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...