Question about 1999 Dodge Durango

1 Answer

CHANGE SERPENTINE BELT

PROCESS TO CHANGE SERPENTINE BELT

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 161 Answers

Basically its easy......only a couple steps.....might want a helping hand......first to make it easy they make a tool that gets in hard to reach areas....like where the belt tensioner usually is.....its called crow foot set that ive seen n used....all you do is get the right sized crow foot and put it on the tensioner and release the tension from the belt by pulling toward you (if your on the same side of the truck) then slip the belt off (2nd hands are very helpful here) n slip the new one on......IMPORTANT!!!! MAKE SURE THE RIBS ON THE BELT MATCHES UP PERFECTLY WITH THE PULLIES...CHECK EVERY PULLY TO MAKE SURE THE BELTS NOT HANGIN OFF......let go of the crow foot slowly so u know it seats on the pullies. tell everyone to stand back and startr up

Posted on Sep 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change power steering belt


How To Change The Serpentine Accessory Belt On Nissan Maxima Altima Etc

Nissan Drive Belt Tensioner and Belt Replacement 3 5 Front Wheel Drive

There are several videos on how to change out the serpentine belt For more info just do a web search " 2002 Nissan Altima serpentine belt replacement".

May 26, 2014 | 2002 Nissan Altima

1 Answer

Change a serpentine belt on a 1996 chevy cavalier


Diagram should be under the hood
The auto tensioneris down low and dificult to get to.
If it has not been changed in a while you will need a long thin push stick and a serpentine tool.
Push on the belt hard at the auto adjuster and pop the belt off the smooth pully (located top).
hook up the serpentine belt tool and then mount the new belt

Jan 17, 2010 | 1996 Chevrolet Cavalier

2 Answers

Is the idler pulley what sets the tension on the serpentine belt


yes and that's how you change the belt also. just turn it with a wrench to loosen it if you want to change the belt.

Dec 18, 2009 | 1996 Dodge Caravan

1 Answer

Replace serpentine belt 1998 olds cutlass


Here's a link to a series of videos that will explain how to change the serpentine belt.

http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Here is a diagram of the belt routing which will help you put the belt back on correctly...
18841fa.jpg

Dec 05, 2009 | 1998 Oldsmobile Cutlass

1 Answer

How to change a serpentine belt on a 1998 buick


Here's a link to a video on how to change the serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

You will want to keep this diagram to help ou know how to route the belt when you replace it...

5429c24.jpg

Nov 15, 2009 | 1998 Buick LeSabre

1 Answer

Serpentine belt


I assume you are asking how to change a serpentine belt. This link will take you to a good "how to" video which will guide you thru the process step by step...
http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Also, here are two links to the serpentine belt diagram to help you with routing the belt on reinstallation...
If you have a V-6 http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7033

If you have a V-8
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6005

Sep 05, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

How do I change the serpentine belt?


Here's a good series of short videos that deal with repalcing your serpentine belt. Hope it helps you!
http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Aug 15, 2009 | 1994 Ford Escort

1 Answer

Chage serpentine belt


Try watching this set of free videos to see if it helps to explain how to change the serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904_6/

I'm connecting you with video #6, but you can always go back if you like.

Aug 08, 2009 | 2006 Pontiac Montana SV6

1 Answer

Adjust tension on fan belt


Your '90 Benz has a belt tensioner that is automatic. You just insert the correct tool to ease the tensioner pulley, (The tool is inserted into the bracket for the tensioner pulley), to the left as you're facing the car. Then slip your serpentine belt off. Reinstallation is a reversal of this process. (I believe it's to the left, don't quote me on that)

The radiator support in front, should have a diagram of how the serpentine belt goes on the pulleys.

If your serpentine belt slips, then the belt tensioner pulley assembly is bad, needs to be replaced, or the serpentine belt itself is worn out.

Apr 19, 2009 | 1990 Mercedes-Benz 300 Diesel

Not finding what you are looking for?
1999 Dodge Durango Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...