Question about 2004 Pontiac Grand Am

2 Answers

2004 grand am

Blinker will not stop making noise when not being used. but all lights and controls work

Posted by on

  • Anonymous Jan 05, 2009

    I have the exact same problem. Also my blinker light always flashes quickly I have tried to get it fixed but no one knows what the problem is...the bulb is not out, it just blinks fast

  • jsmith6051 Feb 20, 2009

    We had to have the relay switch inside the console replaced. They also replaced the turn signal handle. it cost me about $200 in southern california.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just had this problem. It seems common through what I've read. It's the multifunction switch on the steering column. It's a fairly simple cleaning fix or you can buy a now one at Auto Zone or another car parts place. see instructions here:
http://www.grandamgt.com/forum/showthread.php?t=50126&highlight=blinker+noise

Posted on Feb 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 479 Answers

There's a timer (an on-off relay) that does the blinking. it's stuck

Posted on Sep 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 grand cherokee jeep limited edition the back window was broken into, and maybe they tried to do somehting to shut down the alarm system, (we dont know)..battery had to be...


Diagnosing an electrical issue is never easy or cheap, sorry. When fuses blow, it is due to an improper flow of electrons. When relays go bad, it is due to overheating(which is often due to an improper flow of electrons). The BCM(Body Control Module) could be to blame... let us know how it works out =D

Feb 01, 2014 | 2004 Jeep Grand Cherokee

1 Answer

Flasher cliker always making noise even if flasher


My '02 Alero did the same thing every since I got the car 5 years ago. After 6 visits to the dealership and them telling me it was the hazard light switch which had gotten recalled, I just gave up. 2 years ago, I started dating a mechanic and he figured out what the problem was. The contact in the steering panel that controls the blinker was dirty. He took my car to work and fixed it. It's definitely something you could do at home if you have a little know how, me being a woman, cars aren't my thing so he did it. He used this link below as a step by step on how to do it. Although its for a Grand Am, its essentially the same car. Hope it helps!
http://www.wikihow.com/Fix-Grand-Am-Turn-Signals

Feb 27, 2010 | 2002 Oldsmobile Alero

1 Answer

The blinker clicking sound won't stop when blinkers are off


Hello, you need to replace the flasher. It is located under the dash on the driver's side near the top of the brake pedal.


Thanks for using FixYa!

Feb 01, 2010 | 2004 Pontiac Grand Am

2 Answers

Blinker clicking noise keeps clicking even when blinker is not blinking 2004 grand am


Signal switch needs to be cleaned or replaced. Copper particles get dragged into dielectric grease then this causes a bridging of power acting as if the switch is still on.

Jan 16, 2010 | 2004 Pontiac Grand Am

2 Answers

Flasher clicks turn signals all work. What needs to be replaced? 2004 Pontiac grand am gt


The clicking noise is you concern ? I would replace the turnsignal switch or the hazzard switch.

Good Luck

Aug 16, 2009 | 2004 Pontiac Grand Am

6 Answers

Beeping Noise/Blinker Noise


sounds like your electronic flasher unit maybe stuck causing the noise. they are generally located under the dash on driver side just below the instrument cluster.

Sep 10, 2008 | 2004 Oldsmobile Alero

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

Related Topics:

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...