The power window on the passenger side is slow, and the switch for the rear windshield wiper seldom responds. my AC will no longer kick on and doesn't even make noise when I turn the dial. it worked before but then stopped suddenly. I replaced the fuse for the AC which is NO.3 I believe and it still did not kick on.
Is the blower inside engaging? If the blower comes on but the a/c compressor doesn't then your low on r-14 but if its visa-versa then it's probably a wiring problem.. hope this helps
SOURCE: porsche 944 electric fan keeps running even when ignition is turned off
Replace the cooling fan relay, another person had the same issue, that's waht it was.
SOURCE: 1985 944 porsche speedometer stop working
There is a gear in the speedo that breaks. This is plastic gear on a metal shaft. The last fix I did was to remove speedo and open it up. I super glued the cracked gear to the shaft because I was unable to find a new one. It worked again with no future problems. I hope this helps.
SOURCE: 1985.5 PORSCHE 944 digital clock (changing time)
There are three buttons, let's call them 1, 2, and 3, from left to right.
Clock
Time setting
A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
function.
B. Hours
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.
C. Minutes
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.
Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.
If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)). 
SOURCE: how to remove crank shaft sensor? 1984 944 porsche
Just curious, why would you want to do that? goto www.clarks-garage.com, that will show you how to remove just about anything from the 944, in detail. Good luck
For all types of power window problem and power windows not
working,i suggest you to go through the help links given below. Click the link
to go through its procedure to troubleshoot the problem :------
Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------
Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------
power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Volkswagen Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-------------
Complete Diagnosis & Testing Power Windows?
http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks.
117 views
Usually answered in minutes!
×