Question about 1990 Chevrolet S-10 Blazer

2 Answers

Please help i have an s10 blazer 4.3 v6 i cant select reverse gear it goes in ok but then theres no drive wen i put it in forward gears it slips slitley does this mean its my converter

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

1. check fluid level... is it low?
2. is the fluid red just like it came out of the bottle or is it brownish, burnt and have solid particles clicking to the dipstick?
3. pull the pan off the transmission and check for clutch/band particles laying in the bottom of the pan (if there, the trans needs rebuilt or replaced with known good one)

Posted on Jul 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 68 Answers

I dowt it it sounds like you got a bad tranny probably not the tourqe converter

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car goes into reverse but won't go forward. What's the problem?


10 Most Common Transmission Problems

www.transmissionrepaircostguide.com/10-common-transmission-proble...
A similar type of thinking goes into diagnosing car trouble. ... response issue, but after shifting into gear the engine's RPMs will surge, but the car won't move ..... Can anyone please explain why my car cant go in reverse but can drive forward

My car will not go in reverse but will drive forward. What could ...

https://answers.yahoo.com/question/index?qid...
Dec 26, 2007 - My car will not go in reverse but will drive forward. ... I tried putting it in neutral and pushing it backwards, but something catches and it won't budge. ... Either way, it's likely that the transaxle is going to require removal and ... the hood and movethe linkage by hand, then it would shift into gear ok for awhile. Why won't my truck go forward, it only goes in reverse? ' Yahoo ...
Feb 23, 2014
My car won't go into reverse, still okay to drive a 2 hour drive ...
Jan 12, 2011
My car won't go in reverse but it will go forward with no problem ...
Feb 6, 2010
My car will drive forward, but not in reverse... Could this be a ...
Sep 11, 2007
More results from answers.yahoo.com

Dec 16, 2015 | Cars & Trucks

1 Answer

What causes Jimmy transmission to slip in forward gears, but OK in reverse


If your fluid level is right you may have a bad transmission. you need to talk to a mechanic.

Mar 22, 2014 | 1994 GMC Jimmy

1 Answer

85 4x4 s10 will not shift out of low gear


If the governer gear strips,it will stay in low.
Round cover at front of tailshaft,somtimes has a metal
clip like a master cyl. cover. Pop the cover and remove the governer
(will lose a small ammount of fluid,maybe 1/4 cup)
The plastic gear on the end may be damaged.

Jan 30, 2013 | 1985 Chevrolet S-10 Blazer

1 Answer

"I have a 1994 S10 Blazer, 4 WD, 4.3.


Have you topped up your transmission fluid yet?

Aug 09, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

Reverse is gone on 1995 chevy blazer s10-goes forward just fine


reverse clutch went out rebuild transmission

Feb 21, 2009 | 1999 GMC Jimmy

1 Answer

1993 chevy blazer S10


That is a very common problem with General Motors 700R4 transmission. There is a shell that encases the majority of the forward gears and the reverse drum is on top of it and that completely encases the forward drum. at the bottom of that shell there is a collar that is about one quarter of an inch long that rides on a gear set called planetarys. those have a problem with breaking and cause no reverse and driving in neutral. that is the link between the front and rear shaft of the transmission and the weak link. for that to be repaired it has to be removed from the truck and taken apart. It is highly recommended that it be completly rebuilt not just patched due to all of the metal that is sent through the transmission.

Sep 13, 2008 | 1993 Chevrolet S-10 Blazer

1 Answer

Shifting problems


I think you are saying the vehicle pulls forward,no matter what gear you put the shifter in?If this is the case,there is a problem with the forward clutch.I've seen this one over and over in many different transmissions and vehicles.The forward clutch pack is always applied whenever the vehicle is moving forward.It is never applied in reverse,or neutral.So,the forward clutch pack loses clearance from normal wear and tear,or a seal in the pack goes bad,and the clutches start slipping....and slipping........still slipping.....until they get SO hot,the clutch plates and steel plates fuse together,are welded together.This is why your Millenia is going forward in reverse and neutral.It's either that or you have a problem with the shifter cable,or linkage,and you didn't mention anything about the detents,or not being able to obtain Park,so i assume all that is ok

Jul 10, 2008 | 2001 Mazda Millenia

Not finding what you are looking for?
1990 Chevrolet S-10 Blazer Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...