Question about 2007 Honda CR-V

1 Answer

Oil life --wrench display

I had my oil change by Jiffy Lube and now a wrench displays that Jiffy Lube can't get to stop displaying. I have been told there is a little trick to getting the wrench off. Can you help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Display info and then hold reset for 16seconds it will ask oil life reset 100 pecent yes or no press yes

Posted on Sep 30, 2008

  • Graham Core Nov 06, 2008

    check your owners manual with car simple fix key on press button on odometer for 15 seconds the light will flash then press again and will be reset for 6000 km light wiill be out the wrench is a service /maintance reminder in case you forget to maintain your investment

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had an oil change at Jiffy Lube and was told later by Hyundai there is a bullentin announcement about aftermarket oil filters. I had the oil changed at Hyundai because the engine was making a ...


Did the Hyundai dealer say the noise was the result of using the aftermarket filter? If so, I would take a copy of that bulletin to Jiffy Lube and see what they say.

Feb 19, 2015 | Hyundai Cars & Trucks

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

1 Answer

Ford explorer trac 2007 change the oil and filter and now have a wrench light on ,how resolve the problem


Sounds like you need to reset your Oil life/ maintenance reminder light. (also, double check your oil level)

To reset Oil life on a standard dash stlye:
1. pres and release the TRIP/RESET button until the message center displays SETUP MENU HOLD RESET
2. Press and hold the TRIP/RESET button for 2 seconds until the message center displays RESET FOR SYS CHECK
3. press and hold the TRIP/RESET button for 2 seconds until the message center displays OIL LIFE xx% RESET IF NEW
4. Press and release the TRIP/RESET button until the message center displays HOLD RESET IF NEW OIL
5. Press and hold TRIP/RESET button for 2 seconds and release to reset oil life to 100%
6. Message center will briefly display OIL CHANGE SET TO 100%


With a message center cluster the procedure is as follows:
1. press and release SETUP button until message center displays PRESS RESET TO BEGIN SYSTEM CHECK
2. Press and release RESET button until the message center displays HOLD RESET IF NEW OIL
3. Press and hold RESET button for 2 seconds and release to reset the oil life to 100%
4. The message center displays SETUP MENU HOLD RESET


Hope this is what you need/ are looking for. Goodluck & let me know how it goes, or if you have a different problem.

Nov 03, 2013 | 2006 Ford Explorer

2 Answers

What does the wrench warning light on my dashboard of my 2007 civic mean?


it usually means you are due for an oil change unless the last place that changed oil did not reset the light. Some Odometer displays will show you the oil life when you switch through the displays.

Feb 28, 2012 | 2007 Honda Civic GX NGV Sedan

3 Answers

How do you reset the oil change required after oil change on a 2007 ford explorer sport trac limited?


Depending on your cluster its one of these...


Message Center Configuration
Oil Life Reset - Message Center Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days

  1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
  2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
  4. The message center displays SETUP MENU HOLD RESET.
Oil Life Reset - Base Instrument Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

  1. Place the ignition in the RUN position with the engine off (KOEO).
  2. Press and release the TRIP/RESET button until SETUP MENU HOLD RESET is displayed.
  3. Press and hold the TRIP/RESET button until SYSTEM CHECK is displayed.
  4. Release the TRIP/RESET button.
  5. Press and release the TRIP/RESET button to scroll through the system check menu items until HOLD RESET IF NEW OIL is displayed.
  6. Press and hold the TRIP/RESET button until OIL LIFE SET TO 100% is displayed.
  7. Release the TRIP/RESET button. The oil life is now reset.
Oil Life Start Value - Message Center Cluster

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was previously changed or to lower the value from the maximum (8,000 km
To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
  1. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
  2. Press RESET control to display "HOLD RESET IF NEW OIL".
  3. Press and hold RESET control for more than 2 seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed

Mar 06, 2011 | 2007 Ford Explorer Sport Trac

2 Answers

When Jiffy Lube changed the oil in my 2009 Ford Expedition, they did not reset the "Change Oil" message in the instrument panel. Since I set out on a trip immediately after the service, I can't...


You can leave it,it is a gadget,not tied to any system

You should have an owners manual (still) on a 2009

Never go the Jiffy Lube

Read all the damage and horror stories ,on quick change
places.

Dec 08, 2010 | Ford Expedition Cars & Trucks

3 Answers

How 2 turn off "oil change required" lite


Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

Good luck and print this and keep it in the glove box. Keep me posted if you have any other questions

Nov 04, 2009 | 2002 Ford Explorer

1 Answer

Changed oil and message center still says oil change required (2002 mercury mountaineer)


Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

Nov 03, 2009 | 2002 Mercury Mountaineer

2 Answers

After an oil change the change oil light remains on


Press the setup button until "press reset at oil change" is displayed.
Then press and Release reset button until "hold reset to confirm" is displayed.
Now press and Hold reset button until "oil life set to 100%" is displayed.

Apr 13, 2009 | 2005 Ford Five Hundred

Not finding what you are looking for?
2007 Honda CR-V Logo

Related Topics:

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...